Add support of distro boot for ls2080aqds

Signed-off-by: Biwen Li <biwen...@nxp.com>
---
 include/configs/ls2080aqds.h | 34 ++++++++++++++++++++++++++++++++--
 1 file changed, 32 insertions(+), 2 deletions(-)

diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 88da69f36f..e93faab9a4 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -383,7 +383,30 @@ unsigned long get_board_ddr_clk(void);
        "kernelheader_size=0x40000\0"           \
        "BOARD=ls2088aqds\0" \
        "mcmemsize=0x70000000 \0" \
+       "scriptaddr=0x80000000\0"               \
+       "scripthdraddr=0x80080000\0"            \
        IFC_MC_INIT_CMD                         \
+       BOOTENV                                 \
+       "boot_scripts=ls2088aqds_boot.scr\0"    \
+       "boot_script_hdr=hdr_ls2088aqds_bs.out\0"       \
+       "scan_dev_for_boot_part="               \
+               "part list ${devtype} ${devnum} devplist; "     \
+               "env exists devplist || setenv devplist 1; "    \
+               "for distro_bootpart in ${devplist}; do "       \
+                       "if fstype ${devtype} "                 \
+                               "${devnum}:${distro_bootpart} " \
+                               "bootfstype; then "             \
+                               "run scan_dev_for_boot; "       \
+                       "fi; "                                  \
+               "done\0"                                        \
+       "boot_a_script="                                        \
+               "load ${devtype} ${devnum}:${distro_bootpart} " \
+                       "${scriptaddr} ${prefix}${script}; "    \
+               "env exists secureboot && load ${devtype} "     \
+                       "${devnum}:${distro_bootpart} "         \
+                       "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+                       "&& esbc_validate ${scripthdraddr};"    \
+               "source ${scriptaddr}\0"                        \
        "nor_bootcmd=echo Trying load from nor..;"              \
                "cp.b $kernel_addr $load_addr "                 \
                "$kernel_size ; env exists secureboot && "      \
@@ -429,6 +452,13 @@ unsigned long get_board_ddr_clk(void);
 #endif /* CONFIG_NXP_ESBC */
 
 #ifdef CONFIG_TFABOOT
+#define BOOT_TARGET_DEVICES(func) \
+       func(USB, usb, 0) \
+       func(MMC, mmc, 0) \
+       func(SCSI, scsi, 0) \
+       func(DHCP, dhcp, na)
+#include <config_distro_bootcmd.h>
+
 #define SD_BOOTCOMMAND                                         \
                        "env exists mcinitcmd && env exists secureboot "\
                        "&& mmcinfo && mmc read $load_addr 0x3600 0x800 " \
@@ -436,14 +466,14 @@ unsigned long get_board_ddr_clk(void);
                        "env exists mcinitcmd && run mcinitcmd "        \
                        "&& mmc read 0x80d00000 0x6800 0x800 "          \
                        "&& fsl_mc lazyapply dpl 0x80d00000; "          \
-                       "run sd_bootcmd; "              \
+                       "run distro_bootcmd;run sd_bootcmd; "           \
                        "env exists secureboot && esbc_halt;"
 
 #define IFC_NOR_BOOTCOMMAND                                            \
                        "env exists mcinitcmd && env exists secureboot "\
                        "&& esbc_validate 0x5806C0000; env exists mcinitcmd "\
                        "&& fsl_mc lazyapply dpl 0x580d00000;"          \
-                       "run nor_bootcmd; "             \
+                       "run distro_bootcmd;run nor_bootcmd; "          \
                        "env exists secureboot && esbc_halt;"
 #endif
 
-- 
2.17.1

Reply via email to