This patch adds a new pstore command allowing to display or save ramoops
logs (oops, panic, console, ftrace and user) generated by a previous
kernel crash.
PStore parameters can be set in U-Boot configuration file, or at run-time
using "pstore set" command. Records size should be the same as the ones
used by kernel, and should be a power of 2.
This command allows:
- to display uncompressed logs
- to save compressed or uncompressed logs, compressed logs are saved as a
compressed stream, it may need some work to be able to decompress it,
e.g. adding a fake header:
"printf "\x1f\x8b\x08\x00\x00\x00\x00\x00\x00\x00" |
cat - dmesg-ramoops-0.enc.z | gzip -dc"
- ECC part is not used to check memory corruption
- only 1st FTrace log is displayed or saved
Signed-off-by: Frédéric Danis <frederic.da...@collabora.com>
---
cmd/Kconfig | 71 +++++++
cmd/Makefile | 1 +
cmd/pstore.c | 505 +++++++++++++++++++++++++++++++++++++++++++++++++
doc/index.rst | 7 +
doc/pstore.rst | 74 ++++++++
5 files changed, 658 insertions(+)
create mode 100644 cmd/pstore.c
create mode 100644 doc/pstore.rst
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 6403bc45a5..cd202bf7fb 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -1736,6 +1736,77 @@ config CMD_QFW
feature is to allow easy loading of files passed to qemu-system
via -kernel / -initrd
+config CMD_PSTORE
+ bool "pstore"
+ help
+ This provides access to Linux PStore with Rammoops backend. The main
+ feature is to allow to display or save PStore records.
+
+ See doc/pstore.rst for more information.
+
+if CMD_PSTORE
+
+config CMD_PSTORE_MEM_ADDR
+ hex "Memory Address"
+ depends on CMD_PSTORE
+ help
+ Base addr used for PStore ramoops memory, should be identical to
+ ramoops.mem_address parameter used by kernel
+
+config CMD_PSTORE_MEM_SIZE
+ hex "Memory size"
+ depends on CMD_PSTORE
+ default "0x10000"
+ help
+ Size of PStore ramoops memory, should be identical to ramoops.mem_size
+ parameter used by kernel, a power of 2 and larger than the sum of the
+ record sizes
+
+config CMD_PSTORE_RECORD_SIZE
+ hex "Dump record size"
+ depends on CMD_PSTORE
+ default "0x1000"
+ help
+ Size of each dump done on oops/panic, should be identical to
+ ramoops.record_size parameter used by kernel and a power of 2
+ Must be non-zero
+
+config CMD_PSTORE_CONSOLE_SIZE
+ hex "Kernel console log size"
+ depends on CMD_PSTORE
+ default "0x1000"
+ help
+ Size of kernel console log, should be identical to
+ ramoops.console_size parameter used by kernel and a power of 2
+ Must be non-zero
+
+config CMD_PSTORE_FTRACE_SIZE
+ hex "FTrace log size"
+ depends on CMD_PSTORE
+ default "0x1000"
+ help
+ Size of ftrace log, should be identical to ramoops.ftrace_size
+ parameter used by kernel and a power of 2
+
+config CMD_PSTORE_PMSG_SIZE
+ hex "User space message log size"
+ depends on CMD_PSTORE
+ default "0x1000"
+ help
+ Size of user space message log, should be identical to
+ ramoops.pmsg_size parameter used by kernel and a power of 2
+
+config CMD_PSTORE_ECC_SIZE
+ int "ECC size"
+ depends on CMD_PSTORE
+ default "0"
+ help
+ if non-zero, the option enables ECC support and specifies ECC buffer
+ size in bytes (1 is a special value, means 16 bytes ECC), should be
+ identical to ramoops.ramoops_ecc parameter used by kernel
+
+endif
+
source "cmd/mvebu/Kconfig"
config CMD_TERMINAL
diff --git a/cmd/Makefile b/cmd/Makefile
index f1dd513a4b..06d7ad7375 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -110,6 +110,7 @@ obj-$(CONFIG_CMD_PCI) += pci.o
endif
obj-$(CONFIG_CMD_PINMUX) += pinmux.o
obj-$(CONFIG_CMD_PMC) += pmc.o
+obj-$(CONFIG_CMD_PSTORE) += pstore.o
obj-$(CONFIG_CMD_PXE) += pxe.o pxe_utils.o
obj-$(CONFIG_CMD_WOL) += wol.o
obj-$(CONFIG_CMD_QFW) += qfw.o
diff --git a/cmd/pstore.c b/cmd/pstore.c
new file mode 100644
index 0000000000..4e4d70d604
--- /dev/null
+++ b/cmd/pstore.c
@@ -0,0 +1,505 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright © 2019 Collabora Ltd
+ */
+
+#include <config.h>
+#include <common.h>
+#include <fs.h>
+#include <mapmem.h>
+#include <memalign.h>
+#include <part.h>
+
+struct persistent_ram_buffer {
+ u32 sig;
+ u32 start;
+ u32 size;
+ u8 data[0];
+};
+
+#define PERSISTENT_RAM_SIG (0x43474244) /* DBGC */
+#define RAMOOPS_KERNMSG_HDR "===="
+
+#define PSTORE_TYPE_DMESG 0
+#define PSTORE_TYPE_CONSOLE 2
+#define PSTORE_TYPE_FTRACE 3
+#define PSTORE_TYPE_PMSG 7
+#define PSTORE_TYPE_ALL 255
+
+static phys_addr_t pstore_addr = CONFIG_CMD_PSTORE_MEM_ADDR;
+static phys_size_t pstore_length = CONFIG_CMD_PSTORE_MEM_SIZE;
+static unsigned int pstore_record_size = CONFIG_CMD_PSTORE_RECORD_SIZE;
+static unsigned int pstore_console_size = CONFIG_CMD_PSTORE_CONSOLE_SIZE;
+static unsigned int pstore_ftrace_size = CONFIG_CMD_PSTORE_FTRACE_SIZE;
+static unsigned int pstore_pmsg_size = CONFIG_CMD_PSTORE_PMSG_SIZE;
+static unsigned int pstore_ecc_size = CONFIG_CMD_PSTORE_ECC_SIZE;
+static unsigned int buffer_size;
+
+ /**
+ * pstore_read_kmsg_hdr() - Check kernel header and get compression flag if
+ * available.
+ * @buffer: Kernel messages buffer.
+ * @compressed: Returns TRUE if kernel buffer is compressed, else FALSE.
+ *
+ * Check if buffer starts with a kernel header of the form:
+ * ====<secs>.<nsecs>[-<compression>]\n
+ * If <compression> is equal to 'C' then the buffer is compressed, else iter
+ * should be 'D'.
+ *
+ * Return: Length of kernel header.
+ */
+static int pstore_read_kmsg_hdr(char *buffer, bool *compressed)
+{
+ char *ptr = buffer;
+ *compressed = false;
+
+ if (strncmp(RAMOOPS_KERNMSG_HDR, ptr, strlen(RAMOOPS_KERNMSG_HDR)) != 0)
+ return 0;
+
+ ptr += strlen(RAMOOPS_KERNMSG_HDR);
+
+ ptr = strchr(ptr, '\n');
+ if (!ptr)
+ return 0;
+
+ if (ptr[-2] == '-' && ptr[-1] == 'C')
+ *compressed = true;
+
+ return ptr - buffer + 1;
+}
+
+/**
+ * pstore_get_buffer() - Get unwrapped record buffer
+ * @sig: Signature to check
+ * @buffer: Buffer containing wrapped record
+ * @size: wrapped record size
+ * @dest: Buffer used to store unwrapped record
+ *
+ * The record starts with <signature><start><size> header.
+ * The signature is 'DBGC' for all records except for Ftrace's record(s) wich
+ * use LINUX_VERSION_CODE ^ 'DBGC'.
+ * Use 0 for @sig to prevent checking signature.
+ * Start and size are 4 bytes long.
+ *
+ * Return: record's length
+ */
+static u32 pstore_get_buffer(u32 sig, phys_addr_t buffer, u32 size, char *dest)
+{
+ struct persistent_ram_buffer *prb =
+ (struct persistent_ram_buffer *)map_sysmem(buffer, size);
+ u32 dest_size;
+
+ if (sig == 0 || prb->sig == sig) {
+ if (prb->size == 0) {
+ log_debug("found existing empty buffer\n");
+ return 0;
+ }
+
+ if (prb->size > size) {
+ log_debug("found existing invalid buffer, size %u,
start %u\n",
+ prb->size, prb->start);
+ return 0;
+ }
+ } else {
+ log_debug("no valid data in buffer (sig = 0x%08x)\n", prb->sig);
+ return 0;
+ }
+
+ log_debug("found existing buffer, size %u, start %u\n",
+ prb->size, prb->start);
+
+ memcpy(dest, &prb->data[prb->start], prb->size - prb->start);
+ memcpy(dest + prb->size - prb->start, &prb->data[0], prb->start);
+
+ dest_size = prb->size;
+ unmap_sysmem(prb);
+
+ return dest_size;
+}
+
+/**
+ * pstore_init_buffer_size() - Init buffer size to largest record size
+ *
+ * Records, console, FTrace and user logs can use different buffer sizes.
+ * This function allows to retrieve the biggest one.
+ */
+static void pstore_init_buffer_size(void)
+{
+ if (pstore_record_size > buffer_size)
+ buffer_size = pstore_record_size;
+
+ if (pstore_console_size > buffer_size)
+ buffer_size = pstore_console_size;
+
+ if (pstore_ftrace_size > buffer_size)
+ buffer_size = pstore_ftrace_size;
+
+ if (pstore_pmsg_size > buffer_size)
+ buffer_size = pstore_pmsg_size;
+}
+
+/**
+ * pstore_set() - Initialize PStore settings from command line arguments
+ * @cmdtp: Command data struct pointer
+ * @flag: Command flag
+ * @argc: Command-line argument count
+ * @argv: Array of command-line arguments
+ *
+ * Set pstore reserved memory info, starting at 'addr' for 'len' bytes.
+ * Default length for records is 4K.
+ * Mandatory arguments:
+ * - addr: ramoops starting address
+ * - len: ramoops total length
+ * Optional arguments:
+ * - record-size: size of one panic or oops record ('dump' type)
+ * - console-size: size of the kernel logs record
+ * - ftrace-size: size of the ftrace record(s), this can be a single record or
+ * divided in parts based on number of CPUs
+ * - pmsg-size: size of the user space logs record
+ * - ecc-size: enables/disables ECC support and specifies ECC buffer size in
+ * bytes (0 disables it, 1 is a special value, means 16 bytes ECC)
+ *
+ * Return: zero on success, CMD_RET_USAGE in case of misuse and negative
+ * on error.
+ */
+static int pstore_set(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ if (argc < 3)
+ return CMD_RET_USAGE;
+
+ /* Address is specified since argc > 2
+ */
+ pstore_addr = simple_strtoul(argv[1], NULL, 16);
+
+ /* Length is specified since argc > 2
+ */
+ pstore_length = simple_strtoul(argv[2], NULL, 16);
+
+ if (argc > 3)
+ pstore_record_size = simple_strtoul(argv[3], NULL, 16);
+
+ if (argc > 4)
+ pstore_console_size = simple_strtoul(argv[4], NULL, 16);
+
+ if (argc > 5)
+ pstore_ftrace_size = simple_strtoul(argv[5], NULL, 16);
+
+ if (argc > 6)
+ pstore_pmsg_size = simple_strtoul(argv[6], NULL, 16);
+
+ if (argc > 7)
+ pstore_ecc_size = simple_strtoul(argv[7], NULL, 16);
+
+ if (pstore_length < (pstore_record_size + pstore_console_size
+ + pstore_ftrace_size + pstore_pmsg_size)) {
+ printf("pstore <len> should be larger than the sum of all
records sizes\n");
+ pstore_length = 0;
+ }
+
+ log_debug("pstore set done: start 0x%08llx - length 0x%llx\n",
+ (unsigned long long)pstore_addr,
+ (unsigned long long)pstore_length);
+
+ return 0;
+}
+
+/**
+ * pstore_print_buffer() - Print buffer
+ * @type: buffer type
+ * @buffer: buffer to print
+ * @size: buffer size
+ *
+ * Print buffer type and content
+ */
+static void pstore_print_buffer(char *type, char *buffer, u32 size)
+{
+ u32 i = 0;
+
+ printf("**** %s\n", type);
+ while (i < size && buffer[i] != 0) {
+ putc(buffer[i]);
+ i++;
+ }
+}
+
+/**
+ * pstore_display() - Display existing records in pstore reserved memory
+ * @cmdtp: Command data struct pointer
+ * @flag: Command flag
+ * @argc: Command-line argument count
+ * @argv: Array of command-line arguments
+ *
+ * A 'record-type' can be given to only display records of this kind.
+ * If no 'record-type' is given, all valid records are dispayed.
+ * 'record-type' can be one of 'dump', 'console', 'ftrace' or 'user'. For
'dump'
+ * and 'ftrace' types, a 'nb' can be given to only display one record.
+ *
+ * Return: zero on success, CMD_RET_USAGE in case of misuse and negative
+ * on error.
+ */
+static int pstore_display(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ int type = PSTORE_TYPE_ALL;
+ phys_addr_t ptr;
+ char *buffer;
+ u32 size;
+ int header_len = 0;
+ bool compressed;
+
+ if (argc > 1) {
+ if (!strcmp(argv[1], "dump"))
+ type = PSTORE_TYPE_DMESG;
+ else if (!strcmp(argv[1], "console"))
+ type = PSTORE_TYPE_CONSOLE;
+ else if (!strcmp(argv[1], "ftrace"))
+ type = PSTORE_TYPE_FTRACE;
+ else if (!strcmp(argv[1], "user"))
+ type = PSTORE_TYPE_PMSG;
+ else
+ return CMD_RET_USAGE;
+ }
+
+ if (pstore_length == 0) {
+ printf("Please set PStore configuration\n");
+ return CMD_RET_USAGE;
+ }
+
+ if (buffer_size == 0)
+ pstore_init_buffer_size();
+
+ buffer = malloc_cache_aligned(buffer_size);
+
+ if (type == PSTORE_TYPE_DMESG || type == PSTORE_TYPE_ALL) {
+ ptr = pstore_addr;
+ phys_addr_t ptr_end = ptr + pstore_length - pstore_pmsg_size
+ - pstore_ftrace_size - pstore_console_size;
+
+ if (argc > 2) {
+ ptr += simple_strtoul(argv[2], NULL, 10)
+ * pstore_record_size;
+ ptr_end = ptr + pstore_record_size;
+ }
+
+ while (ptr < ptr_end) {
+ size = pstore_get_buffer(PERSISTENT_RAM_SIG, ptr,
+ pstore_record_size, buffer);
+ ptr += pstore_record_size;
+
+ if (size == 0)
+ continue;
+
+ header_len = pstore_read_kmsg_hdr(buffer, &compressed);
+ if (header_len == 0) {
+ log_debug("no valid kernel header\n");
+ continue;
+ }
+
+ if (compressed) {
+ printf("Compressed buffer, display not
available\n");
+ continue;
+ }
+
+ pstore_print_buffer("Dump", buffer + header_len,
+ size - header_len);
+ }
+ }
+
+ if (type == PSTORE_TYPE_CONSOLE || type == PSTORE_TYPE_ALL) {
+ ptr = pstore_addr + pstore_length - pstore_pmsg_size
+ - pstore_ftrace_size - pstore_console_size;
+ size = pstore_get_buffer(PERSISTENT_RAM_SIG, ptr,
+ pstore_console_size, buffer);
+ if (size != 0)
+ pstore_print_buffer("Console", buffer, size);
+ }
+
+ if (type == PSTORE_TYPE_FTRACE || type == PSTORE_TYPE_ALL) {
+ ptr = pstore_addr + pstore_length - pstore_pmsg_size
+ - pstore_ftrace_size;
+ /* The FTrace record(s) uses LINUX_VERSION_CODE ^ 'DBGC'
+ * signature, pass 0 to pstore_get_buffer to prevent
+ * checking it
+ */
+ size = pstore_get_buffer(0, ptr, pstore_ftrace_size, buffer);
+ if (size != 0)
+ pstore_print_buffer("FTrace", buffer, size);
+ }
+
+ if (type == PSTORE_TYPE_PMSG || type == PSTORE_TYPE_ALL) {
+ ptr = pstore_addr + pstore_length - pstore_pmsg_size;
+ size = pstore_get_buffer(PERSISTENT_RAM_SIG, ptr,
+ pstore_pmsg_size, buffer);
+ if (size != 0)
+ pstore_print_buffer("User", buffer, size);
+ }
+
+ free(buffer);
+
+ return 0;
+}
+
+/**
+ * pstore_save() - Save existing records from pstore reserved memory
+ * @cmdtp: Command data struct pointer
+ * @flag: Command flag
+ * @argc: Command-line argument count
+ * @argv: Array of command-line arguments
+ *
+ * the records are saved under 'directory path', which should already exist,
+ * to partition 'part' on device type 'interface' instance 'dev'
+ * Filenames are automatically generated, depending on record type, like in
+ * /sys/fs/pstore under Linux
+ *
+ * Return: zero on success, CMD_RET_USAGE in case of misuse and negative
+ * on error.
+ */
+static int pstore_save(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ phys_addr_t ptr, ptr_end;
+ char *buffer;
+ char *save_argv[6];
+ char addr[19], length[19];
+ char path[256];
+ u32 size;
+ unsigned int index;
+ int header_len = 0;
+ bool compressed;
+
+ if (argc < 4)
+ return CMD_RET_USAGE;
+
+ if (pstore_length == 0) {
+ printf("Please set PStore configuration\n");
+ return CMD_RET_USAGE;
+ }
+
+ if (buffer_size == 0)
+ pstore_init_buffer_size();
+
+ buffer = malloc_cache_aligned(buffer_size);
+ sprintf(addr, "0x%p", buffer);
+
+ save_argv[0] = argv[0];
+ save_argv[1] = argv[1];
+ save_argv[2] = argv[2];
+ save_argv[3] = addr;
+ save_argv[4] = path;
+ save_argv[5] = length;
+
+ /* Save all Dump records */
+ ptr = pstore_addr;
+ ptr_end = ptr + pstore_length - pstore_pmsg_size - pstore_ftrace_size
+ - pstore_console_size;
+ index = 0;
+ while (ptr < ptr_end) {
+ size = pstore_get_buffer(PERSISTENT_RAM_SIG, ptr,
+ pstore_record_size, buffer);
+ ptr += pstore_record_size;
+
+ if (size == 0)
+ continue;
+
+ header_len = pstore_read_kmsg_hdr(buffer, &compressed);
+ if (header_len == 0) {
+ log_debug("no valid kernel header\n");
+ continue;
+ }
+
+ sprintf(addr, "0x%08lx", (ulong)map_to_sysmem(buffer +
header_len));
+ sprintf(length, "0x%X", size - header_len);
+ sprintf(path, "%s/dmesg-ramoops-%u%s", argv[3], index,
+ compressed ? ".enc.z" : "");
+ do_save(cmdtp, flag, 6, save_argv, FS_TYPE_ANY);
+ index++;
+ }
+
+ sprintf(addr, "0x%08lx", (ulong)map_to_sysmem(buffer));
+
+ /* Save Console record */
+ size = pstore_get_buffer(PERSISTENT_RAM_SIG, ptr, pstore_console_size,
+ buffer);
+ if (size != 0) {
+ sprintf(length, "0x%X", size);
+ sprintf(path, "%s/console-ramoops-0", argv[3]);
+ do_save(cmdtp, flag, 6, save_argv, FS_TYPE_ANY);
+ }
+ ptr += pstore_console_size;
+
+ /* Save FTrace record(s)
+ * The FTrace record(s) uses LINUX_VERSION_CODE ^ 'DBGC' signature,
+ * pass 0 to pstore_get_buffer to prevent checking it
+ */
+ size = pstore_get_buffer(0, ptr, pstore_ftrace_size, buffer);
+ if (size != 0) {
+ sprintf(length, "0x%X", size);
+ sprintf(path, "%s/ftrace-ramoops-0", argv[3]);
+ do_save(cmdtp, flag, 6, save_argv, FS_TYPE_ANY);
+ }
+ ptr += pstore_ftrace_size;
+
+ /* Save Console record */
+ size = pstore_get_buffer(PERSISTENT_RAM_SIG, ptr, pstore_pmsg_size,
+ buffer);
+ if (size != 0) {
+ sprintf(length, "0x%X", size);
+ sprintf(path, "%s/pmsg-ramoops-0", argv[3]);
+ do_save(cmdtp, flag, 6, save_argv, FS_TYPE_ANY);
+ }
+
+ free(buffer);
+
+ return 0;
+}
+
+static cmd_tbl_t cmd_pstore_sub[] = {
+ U_BOOT_CMD_MKENT(set, 8, 0, pstore_set, "", ""),
+ U_BOOT_CMD_MKENT(display, 3, 0, pstore_display, "", ""),
+ U_BOOT_CMD_MKENT(save, 4, 0, pstore_save, "", ""),
+};
+
+static int do_pstore(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ cmd_tbl_t *c;
+
+ if (argc < 2)
+ return CMD_RET_USAGE;
+
+ /* Strip off leading argument */
+ argc--;
+ argv++;
+
+ c = find_cmd_tbl(argv[0], cmd_pstore_sub, ARRAY_SIZE(cmd_pstore_sub));
+
+ if (!c)
+ return CMD_RET_USAGE;
+
+ return c->cmd(cmdtp, flag, argc, argv);
+}
+
+U_BOOT_CMD(pstore, 10, 0, do_pstore,
+ "Manage Linux Persistent Storage",
+ "set <addr> <len> [record-size] [console-size] [ftrace-size]
[pmsg_size] [ecc-size]\n"
+ "- Set pstore reserved memory info, starting at 'addr' for 'len'
bytes.\n"
+ " Default length for records is 4K.\n"
+ " 'record-size' is the size of one panic or oops record ('dump'
type).\n"
+ " 'console-size' is the size of the kernel logs record.\n"
+ " 'ftrace-size' is the size of the ftrace record(s), this can be a
single\n"
+ " record or divided in parts based on number of CPUs.\n"
+ " 'pmsg-size' is the size of the user space logs record.\n"
+ " 'ecc-size' enables/disables ECC support and specifies ECC buffer
size in\n"
+ " bytes (0 disables it, 1 is a special value, means 16 bytes
ECC).\n"
+ "pstore display [record-type] [nb]\n"
+ "- Display existing records in pstore reserved memory. A
'record-type' can\n"
+ " be given to only display records of this kind. 'record-type' can
be one\n"
+ " of 'dump', 'console', 'ftrace' or 'user'. For 'dump' and 'ftrace'
types,\n"
+ " a 'nb' can be given to only display one record.\n"
+ "pstore save <interface> <dev[:part]> <directory-path>\n"
+ "- Save existing records in pstore reserved memory under 'directory
path'\n"
+ " to partition 'part' on device type 'interface' instance 'dev'.\n"
+ " Filenames are automatically generated, depending on record type,
like\n"
+ " in /sys/fs/pstore under Linux.\n"
+ " The 'directory-path' should already exist.\n"
+);
diff --git a/doc/index.rst b/doc/index.rst
index cd98be6cc5..c556cdb607 100644
--- a/doc/index.rst
+++ b/doc/index.rst
@@ -98,6 +98,13 @@ Android-specific features available in U-Boot.
android/index
+Command line
+------------
+.. toctree::
+ :maxdepth: 2
+
+ pstore.rst
+
Indices and tables
==================
diff --git a/doc/pstore.rst b/doc/pstore.rst
new file mode 100644
index 0000000000..90a8e1c2cb
--- /dev/null
+++ b/doc/pstore.rst
@@ -0,0 +1,74 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+PStore command
+==============
+
+Design
+------
+
+Linux PStore and Ramoops modules (Linux config options PSTORE and PSTORE_RAM)
+allow to use memory to pass data from the dying breath of a crashing kernel to
+its successor. This command allows to read those records from U-Boot command
+line.
+
+Ramoops is an oops/panic logger that writes its logs to RAM before the system
+crashes. It works by logging oopses and panics in a circular buffer. Ramoops
+needs a system with persistent RAM so that the content of that area can survive
+after a restart.
+
+Ramoops uses a predefined memory area to store the dump.
+
+Ramoops parameters can be passed as kernel parameters or through Device Tree,
+i.e.::
+ ramoops.mem_address=0x30000000 ramoops.mem_size=0x100000
ramoops.record_size=0x2000 ramoops.console_size=0x2000
memmap=0x100000$0x30000000
+
+The same values should be set in U-Boot to be able to retrieve the records.
+This values can be set at build time in U-Boot configuration file, or at
runtime.
+
+The PStore configuration parameters are:
+
+======================= ==========
+ Name Default
+======================= ==========
+CMD_PSTORE_MEM_ADDR
+CMD_PSTORE_MEM_SIZE 0x10000
+CMD_PSTORE_RECORD_SIZE 0x1000
+CMD_PSTORE_CONSOLE_SIZE 0x1000
+CMD_PSTORE_FTRACE_SIZE 0x1000
+CMD_PSTORE_PMSG_SIZE 0x1000
+CMD_PSTORE_ECC_SIZE 0
+======================= ==========
+
+Records sizes should be a power of 2.
+The memory size and the record/console size must be non-zero.
+
+Multiple 'dump' records can be stored in the memory reserved for PStore.
+The memory size has to be larger than the sum of the record sizes, i.e.::
+ MEM_SIZE >= RECORD_SIZE * n + CONSOLE_SIZE + FTRACE_SIZE + PMSG_SIZE
+
+Usage
+-----
+
+Generate kernel crash
+~~~~~~~~~~~~~~~~~~~~~
+
+For test purpose, you can generate a kernel crash by setting reboot timeout to
+10 seconds and trigger a panic::
+ $ sudo sh -c "echo 1 > /proc/sys/kernel/sysrq"
+ $ sudo sh -c "echo 10 > /proc/sys/kernel/panic"
+ $ sudo sh -c "echo c > /proc/sysrq-trigger"
+
+Retrieve logs in U-Boot
+~~~~~~~~~~~~~~~~~~~~~~~
+
+First of all, unless PStore parameters as been set during U-Boot configuration
+and match kernel ramoops parameters, it needs to be set using 'pstore set',
e.g.::
+ => pstore set 0x30000000 0x100000 0x2000 0x2000
+
+Then all available dumps can be displayed
+using::
+ => pstore display
+
+Or saved to an existing directory in an Ext2 or Ext4 partition, e.g. on root
+directory of 1st partition of the 2nd MMC::
+ => pstore save mmc 1:1 /
--
2.18.0
