Ping? On Tue, Mar 17, 2020 at 10:52 PM Kever Yang <kever.y...@rock-chips.com> wrote: > > > On 2020/3/14 上午1:42, Otavio Salvador wrote: > > Since commit 8e9a8d0d0c8c ("rockchip: elgin-rv1108: use board_early_init_f > > for per-boar init") the function that configure the board GPIOs is no > > longer called since CONFIG_BOARD_EARLY_INIT_F=y is not selected. > > > > These GPIOs do not need to be configured in such early stagem, so change it > > to rk_board_late_init() and also select CONFIG_BOARD_LATE_INIT=y > > to fix the regression. > > > > Signed-off-by: Otavio Salvador <ota...@ossystems.com.br> > > Signed-off-by: Fabio Berton <fabio.ber...@ossystems.com.br> > > > Reviewed-by: Kever Yang <kever.y...@rock-chips.com> > > Thanks, > - Kever > > --- > > > > board/elgin/elgin_rv1108/elgin_rv1108.c | 2 +- > > configs/elgin-rv1108_defconfig | 1 + > > 2 files changed, 2 insertions(+), 1 deletion(-) > > > > diff --git a/board/elgin/elgin_rv1108/elgin_rv1108.c > > b/board/elgin/elgin_rv1108/elgin_rv1108.c > > index 607667ac63..dddd950ab2 100644 > > --- a/board/elgin/elgin_rv1108/elgin_rv1108.c > > +++ b/board/elgin/elgin_rv1108/elgin_rv1108.c > > @@ -50,7 +50,7 @@ int mach_cpu_init(void) > > > > #define MODEM_ENABLE_GPIO 111 > > > > -int board_early_init_f(void) > > +int rk_board_late_init(void) > > { > > gpio_request(MODEM_ENABLE_GPIO, "modem_enable"); > > gpio_direction_output(MODEM_ENABLE_GPIO, 0); > > diff --git a/configs/elgin-rv1108_defconfig b/configs/elgin-rv1108_defconfig > > index 62af7634a3..80d53f3c10 100644 > > --- a/configs/elgin-rv1108_defconfig > > +++ b/configs/elgin-rv1108_defconfig > > @@ -10,6 +10,7 @@ CONFIG_DEBUG_UART_CLOCK=24000000 > > CONFIG_DEBUG_UART=y > > # CONFIG_USE_BOOTCOMMAND is not set > > CONFIG_DEFAULT_FDT_FILE="rv1108-elgin-r1.dtb" > > +CONFIG_BOARD_LATE_INIT=y > > # CONFIG_DISPLAY_CPUINFO is not set > > CONFIG_DISPLAY_BOARDINFO_LATE=y > > CONFIG_CMD_GPIO=y > >
-- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750