On 2010/08/12 3:14 PM, Reinhard Meyer wrote: > It is mostly likely a 8/16 bit wide device in 8 bit mode on an 8 bit > external bus. Then all CFI data appears twice.
Yes, this is exactly what I was seeing. > Reason: the chip presents CFI data correctly (from the flash point of view) > in 16 bit mode (flash A0 connected to CPU A1). If connected in 8 bit mode > (flash A0 connected to CPU A1, flash A-1 connected to CPU A0) it still > presents the data at the same adresses but the CFI driver gets misled > because its told to try for 8 bit wide flash. > > Since that was an issue long ago, I made the board/emk/common/flash.c > (CFI) driver. Anyone is welcome to add that special handling for 16 bit > flash connected in 8 bit mode to the general CFI driver :) Thanks a lot! I'll take a look, and see if I can understand it. :-) Rogan _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot