Hi Marek,
> -----Original Message-----
> From: Patrick DELAUNAY <patrick.delau...@st.com>
> Sent: mercredi 1 avril 2020 15:52
> To: Marek Vasut <ma...@denx.de>; Patrice CHOTARD
> <patrice.chot...@st.com>; u-boot@lists.denx.de; Pascal PAILLET-LME
> <p.pail...@st.com>
> Cc: Manivannan Sadhasivam <manivannan.sadhasi...@linaro.org>;
> Alexandre TORGUE <alexandre.tor...@st.com>
> Subject: RE: [PATCH V3 12/14] ARM: dts: stm32: Repair PMIC configuration on
> AV96
>
> Hi,
>
> > From: Marek Vasut <ma...@denx.de>
> > Sent: mercredi 1 avril 2020 14:53
> > To: Patrice CHOTARD <patrice.chot...@st.com>; Patrick DELAUNAY
> > <patrick.delau...@st.com>; u-boot@lists.denx.de; Pascal PAILLET-LME
> > <p.pail...@st.com>
> > Cc: Manivannan Sadhasivam <manivannan.sadhasi...@linaro.org>;
> > Alexandre TORGUE <alexandre.tor...@st.com>
> > Subject: Re: [PATCH V3 12/14] ARM: dts: stm32: Repair PMIC
> > configuration on
> > AV96
> > Importance: High
> >
> > On 4/1/20 2:45 PM, Patrice CHOTARD wrote:
> > >
> > > On 4/1/20 1:06 PM, Marek Vasut wrote:
> > >> On 4/1/20 9:34 AM, Patrick DELAUNAY wrote:
> > >>> Hi Marek and Pascal,
> > >> Hi,
> > >>
> > >> [...]
> [...]
> > >>>> vdd: buck3 {
> > >>>> regulator-name = "vdd";
> > >>>> - regulator-min-microvolt = <3300000>;
> > >>>> - regulator-max-microvolt = <3300000>;
> > >>>> + regulator-min-microvolt = <2900000>;
> > >>>> + regulator-max-microvolt = <2900000>;
> > >>>> regulator-always-on;
> > >>>> st,mask_reset;
> > >>>> regulator-initial-mode = <0>; @@ -
> 268,6 +279,7 @@
> > >>>> regulator-name = "vbus_otg";
> > >>>> interrupts = <IT_OCP_OTG 0>;
> > >>>> interrupt-parent = <&pmic>;
> > >>>> + regulator-active-discharge = <1>;
> > >>> It seems this setting introduced other-consumption, it should not be
> used.
> > >> Other-consumption ? What does that mean ?
> > >
> > > It's a typo, Patrick means over-consumption.
> >
> > Ah. Do you have any details on that ?
>
> Sorry for typo.
>
> No details on my side, it was a Pascal Paillet's direct feedback (Maintainer
> of
> STPMIC1 driver in Linux).
You can enable the active discharge on the STPMIC1's VBUSOTG. But, as soon as a
USB host peripheral (such as laptop) will attach and provide VBUS, there will
be a ~8mA continuous power consumption on VBUS through this OTG active
discharge. There is no functional issue behind this 8mA; but you need to know
that 8mA is not compliant with the USB suspend constraint (2.5mA max).
>
> Anyway he will review your patch for Linux, with more details, and I merge
> this patch without modification for U-Boot.
>
> Patrick
Pascal
