Hi Peng,

On Tue, Apr 7, 2020 at 11:06 PM Peng Fan <peng....@nxp.com> wrote:

> Ok, then I think you not have M4 used.

What needs to be done in order to use the M4?

> Which kernel are you using? Which SCFW/SECO?

I am using kernel 5.6.2.

SCFW is imx-sc-firmware-1.2.7.1
SECO is imx-seco-2.3.1

If I use the NXP U-Boot from the imx_4.19.35_1.1.0 BSP the reboot works fine.

Any suggestions?

Thanks

Reply via email to