On 26/03/20 8:56 PM, Adam Ford wrote:
> With the converstion of SMC911x to DM, this can facilitate the omap3
> boards from LogicPD (now called Beacon EmbeddedWorks) to be converted.
> There isn't a clean solution to doing this in phases, so the boards are
> all being done together to avoid breaking functionality.
>
> Because the GPMC bus hasn't been converted, the -u-boot.dtsi node needs
> to show the address of the ethernet controller for each board.
>
> The board file, which is common betwen the OMAP35 and DM37 SOM LV and
> Torpedo boards, can remove the manual ethernet initialization, but it
> still needs to register the address and GPMC configuration for the Ethernet
> controller which is now being moved around to board_late_init().
>
> Lastly, this patch updates the various config files to add the reference
> for DM_ETH and remove the SMC address, which is now fetched from the
> newly created device tree nodes.
Because of this the build is not going through. It is asking to fill in the SMC
address value as below:
#
# configuration written to .config
#
.config:1093:warning: symbol value '' invalid for SMC911X_BASE
*
* Restart config...
*
*
* Network device support
*
Network device support (NETDEVICES) [Y/n/?] y
Enable GbE PHY status parsing and configuration (PHY_GIGE) [N/y/?] n
Altera Triple-Speed Ethernet MAC support (ALTERA_TSE) [N/y/?] n
Broadcom SF2 (Starfighter2) Ethernet support (BCM_SF2_ETH) [N/y/?] n
BCMGENET V5 support (BCMGENET) [N/y/?] n
Synopsys DWC Ethernet QOS device support (DWC_ETH_QOS) [N/y/?] n
Intel PRO/1000 Gigabit Ethernet support (E1000) [N/y/?] n
Synopsys Designware Ethernet MAC (ETH_DESIGNWARE) [N/y/?] n
OpenCores 10/100 Mbps Ethernet MAC (ETHOC) [N/y/?] n
Freescale FMan ethernet support (FMAN_ENET) [N/y/?] n
Ftmac100 Ethernet Support (FTMAC100) [N/y/?] n
Ftgmac100 Ethernet Support (FTGMAC100) [N/y/?] n
ColdFire Ethernet Support (MCFFEC) [N/y/?] n
ColdFire DMA Ethernet Support (FSLDMAFEC) [N/y/?] n
Cadence MACB/GEM Ethernet Interface (MACB) [N/y/?] n
Enable RGMII (RGMII) [N/y/?] n
Enable MII (MII) [N/y/?] n
Realtek 8139 series Ethernet controller driver (RTL8139) [N/y/?] n
Realtek 8169 series Ethernet controller driver (RTL8169) [N/y/?] n
SMSC LAN911x and LAN921x controller driver (SMC911X) [Y/n/?] y
SMC911X Base Address (SMC911X_BASE) [] (NEW)
Can you fix it and re send the patch?
Thanks and regards,
Lokesh
