Hello Fabio,
Am 17.04.2020 um 14:27 schrieb Fabio Estevam:
In some cases U-Boot runs the same binary on different board versions.
In wandboard, for example, there are versions with the PFUZE100 PMIC
populated and others without it.
When the PMIC is not present, it is not really useful to get PMIC error,
so change the error message level to debug instead.
Signed-off-by: Fabio Estevam <feste...@gmail.com>
---
Changes since v1:
- Reworded the commit log for clarity
drivers/power/pmic/pfuze100.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Tested-by: Heiko Schocher <h...@denx.de>
Thanks!
bye,
Heiko
diff --git a/drivers/power/pmic/pfuze100.c b/drivers/power/pmic/pfuze100.c
index 6cf5f35f0f..db630f3ad0 100644
--- a/drivers/power/pmic/pfuze100.c
+++ b/drivers/power/pmic/pfuze100.c
@@ -41,7 +41,7 @@ static int pfuze100_write(struct udevice *dev, uint reg,
const uint8_t *buff,
static int pfuze100_read(struct udevice *dev, uint reg, uint8_t *buff, int
len)
{
if (dm_i2c_read(dev, reg, buff, len)) {
- pr_err("read error from device: %p register: %#x!\n", dev, reg);
+ debug("read error from device: %p register: %#x!\n", dev, reg);
return -EIO;
}
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: h...@denx.de
