Clean up the SROM accessors to bring them up to standards with
U-Boot coding style. Sort variable into reverse xmas tree. No
functional change.

Signed-off-by: Marek Vasut <marek.vasut+rene...@gmail.com>
Cc: Joe Hershberger <joe.hershber...@ni.com>
---
 drivers/net/dc2114x.c | 117 +++++++++++++++++++++++-------------------
 1 file changed, 63 insertions(+), 54 deletions(-)

diff --git a/drivers/net/dc2114x.c b/drivers/net/dc2114x.c
index bd64c75af4..b375906e27 100644
--- a/drivers/net/dc2114x.c
+++ b/drivers/net/dc2114x.c
@@ -441,30 +441,27 @@ static void send_setup_frame(struct eth_device *dev, bd_t 
*bis)
 }
 
 /* SROM Read and write routines. */
-static void
-sendto_srom(struct eth_device* dev, u_int command, u_long addr)
+static void sendto_srom(struct eth_device *dev, u_int command, u_long addr)
 {
        OUTL(dev, command, addr);
        udelay(1);
 }
 
-static int
-getfrom_srom(struct eth_device* dev, u_long addr)
+static int getfrom_srom(struct eth_device *dev, u_long addr)
 {
-       s32 tmp;
+       s32 tmp = INL(dev, addr);
 
-       tmp = INL(dev, addr);
        udelay(1);
-
        return tmp;
 }
 
 /* Note: this routine returns extra data bits for size detection. */
-static int do_read_eeprom(struct eth_device *dev, u_long ioaddr, int location, 
int addr_len)
+static int do_read_eeprom(struct eth_device *dev, u_long ioaddr, int location,
+                         int addr_len)
 {
-       int i;
-       unsigned retval = 0;
        int read_cmd = location | (SROM_READ_CMD << addr_len);
+       unsigned int retval = 0;
+       int i;
 
        sendto_srom(dev, SROM_RD | SROM_SR, ioaddr);
        sendto_srom(dev, SROM_RD | SROM_SR | DT_CS, ioaddr);
@@ -476,14 +473,18 @@ static int do_read_eeprom(struct eth_device *dev, u_long 
ioaddr, int location, i
        /* Shift the read command bits out. */
        for (i = 4 + addr_len; i >= 0; i--) {
                short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
-               sendto_srom(dev, SROM_RD | SROM_SR | DT_CS | dataval, ioaddr);
+
+               sendto_srom(dev, SROM_RD | SROM_SR | DT_CS | dataval,
+                           ioaddr);
                udelay(10);
-               sendto_srom(dev, SROM_RD | SROM_SR | DT_CS | dataval | DT_CLK, 
ioaddr);
+               sendto_srom(dev, SROM_RD | SROM_SR | DT_CS | dataval | DT_CLK,
+                           ioaddr);
                udelay(10);
 #ifdef DEBUG_SROM2
                printf("%X", getfrom_srom(dev, ioaddr) & 15);
 #endif
-               retval = (retval << 1) | ((getfrom_srom(dev, ioaddr) & 
EE_DATA_READ) ? 1 : 0);
+               retval = (retval << 1) |
+                        !!(getfrom_srom(dev, ioaddr) & EE_DATA_READ);
        }
 
        sendto_srom(dev, SROM_RD | SROM_SR | DT_CS, ioaddr);
@@ -498,7 +499,8 @@ static int do_read_eeprom(struct eth_device *dev, u_long 
ioaddr, int location, i
 #ifdef DEBUG_SROM2
                printf("%X", getfrom_srom(dev, ioaddr) & 15);
 #endif
-               retval = (retval << 1) | ((getfrom_srom(dev, ioaddr) & 
EE_DATA_READ) ? 1 : 0);
+               retval = (retval << 1) |
+                        !!(getfrom_srom(dev, ioaddr) & EE_DATA_READ);
                sendto_srom(dev, SROM_RD | SROM_SR | DT_CS, ioaddr);
                udelay(10);
        }
@@ -518,34 +520,38 @@ static int do_read_eeprom(struct eth_device *dev, u_long 
ioaddr, int location, i
  * enable. It returns the data output from the EEPROM, and thus may
  * also be used for reads.
  */
-static int do_eeprom_cmd(struct eth_device *dev, u_long ioaddr, int cmd, int 
cmd_len)
+static int do_eeprom_cmd(struct eth_device *dev, u_long ioaddr, int cmd,
+                        int cmd_len)
 {
-       unsigned retval = 0;
+       unsigned int retval = 0;
 
 #ifdef DEBUG_SROM
        printf(" EEPROM op 0x%x: ", cmd);
 #endif
 
-       sendto_srom(dev,SROM_RD | SROM_SR | DT_CS | DT_CLK, ioaddr);
+       sendto_srom(dev, SROM_RD | SROM_SR | DT_CS | DT_CLK, ioaddr);
 
        /* Shift the command bits out. */
        do {
-               short dataval = (cmd & (1 << cmd_len)) ? EE_WRITE_1 : 
EE_WRITE_0;
-               sendto_srom(dev,dataval, ioaddr);
+               short dataval = (cmd & BIT(cmd_len)) ? EE_WRITE_1 : EE_WRITE_0;
+
+               sendto_srom(dev, dataval, ioaddr);
                udelay(10);
 
 #ifdef DEBUG_SROM2
-               printf("%X", getfrom_srom(dev,ioaddr) & 15);
+               printf("%X", getfrom_srom(dev, ioaddr) & 15);
 #endif
 
-               sendto_srom(dev,dataval | DT_CLK, ioaddr);
+               sendto_srom(dev, dataval | DT_CLK, ioaddr);
                udelay(10);
-               retval = (retval << 1) | ((getfrom_srom(dev,ioaddr) & 
EE_DATA_READ) ? 1 : 0);
+               retval = (retval << 1) |
+                        !!(getfrom_srom(dev, ioaddr) & EE_DATA_READ);
        } while (--cmd_len >= 0);
-       sendto_srom(dev,SROM_RD | SROM_SR | DT_CS, ioaddr);
+
+       sendto_srom(dev, SROM_RD | SROM_SR | DT_CS, ioaddr);
 
        /* Terminate the EEPROM access. */
-       sendto_srom(dev,SROM_RD | SROM_SR, ioaddr);
+       sendto_srom(dev, SROM_RD | SROM_SR, ioaddr);
 
 #ifdef DEBUG_SROM
        printf(" EEPROM result is 0x%5.5x.\n", retval);
@@ -556,21 +562,26 @@ static int do_eeprom_cmd(struct eth_device *dev, u_long 
ioaddr, int cmd, int cmd
 
 static int read_srom(struct eth_device *dev, u_long ioaddr, int index)
 {
-       int ee_addr_size = do_read_eeprom(dev, ioaddr, 0xff, 8) & 0x40000 ? 8 : 
6;
+       int ee_addr_size;
 
-       return do_eeprom_cmd(dev, ioaddr,
-                            (((SROM_READ_CMD << ee_addr_size) | index) << 16)
-                            | 0xffff, 3 + ee_addr_size + 16);
+       ee_addr_size = (do_read_eeprom(dev, ioaddr, 0xff, 8) & BIT(18)) ? 8 : 6;
+
+       return do_eeprom_cmd(dev, ioaddr, 0xffff |
+                            (((SROM_READ_CMD << ee_addr_size) | index) << 16),
+                            3 + ee_addr_size + 16);
 }
 
 #ifdef UPDATE_SROM
-static int write_srom(struct eth_device *dev, u_long ioaddr, int index, int 
new_value)
+static int write_srom(struct eth_device *dev, u_long ioaddr, int index,
+                     int new_value)
 {
-       int ee_addr_size = do_read_eeprom(dev, ioaddr, 0xff, 8) & 0x40000 ? 8 : 
6;
-       int i;
        unsigned short newval;
+       int ee_addr_size;
+       int i;
 
-       udelay(10*1000); /* test-only */
+       ee_addr_size = (do_read_eeprom(dev, ioaddr, 0xff, 8) & BIT(18)) ? 8 : 6;
+
+       udelay(10 * 1000); /* test-only */
 
 #ifdef DEBUG_SROM
        printf("ee_addr_size=%d.\n", ee_addr_size);
@@ -578,33 +589,37 @@ static int write_srom(struct eth_device *dev, u_long 
ioaddr, int index, int new_
 #endif
 
        /* Enable programming modes. */
-       do_eeprom_cmd(dev, ioaddr, (0x4f << (ee_addr_size-4)), 3+ee_addr_size);
+       do_eeprom_cmd(dev, ioaddr, 0x4f << (ee_addr_size - 4),
+                     3 + ee_addr_size);
 
        /* Do the actual write. */
-       do_eeprom_cmd(dev, ioaddr,
-                     (((SROM_WRITE_CMD<<ee_addr_size)|index) << 16) | 
new_value,
+       do_eeprom_cmd(dev, ioaddr, new_value |
+                     (((SROM_WRITE_CMD << ee_addr_size) | index) << 16),
                      3 + ee_addr_size + 16);
 
        /* Poll for write finished. */
        sendto_srom(dev, SROM_RD | SROM_SR | DT_CS, ioaddr);
-       for (i = 0; i < 10000; i++)                     /* Typical 2000 ticks */
+       for (i = 0; i < 10000; i++) {   /* Typical 2000 ticks */
                if (getfrom_srom(dev, ioaddr) & EE_DATA_READ)
                        break;
+       }
 
 #ifdef DEBUG_SROM
        printf(" Write finished after %d ticks.\n", i);
 #endif
 
        /* Disable programming. */
-       do_eeprom_cmd(dev, ioaddr, (0x40 << (ee_addr_size-4)), 3 + 
ee_addr_size);
+       do_eeprom_cmd(dev, ioaddr, (0x40 << (ee_addr_size - 4)),
+                     3 + ee_addr_size);
 
        /* And read the result. */
        newval = do_eeprom_cmd(dev, ioaddr,
-                              (((SROM_READ_CMD<<ee_addr_size)|index) << 16)
+                              (((SROM_READ_CMD << ee_addr_size) | index) << 16)
                               | 0xffff, 3 + ee_addr_size + 16);
 #ifdef DEBUG_SROM
        printf("  New value at offset %d is %4.4x.\n", index, newval);
 #endif
+
        return 1;
 }
 #endif
@@ -615,30 +630,23 @@ static void read_hw_addr(struct eth_device *dev, bd_t 
*bis)
        int i, j = 0;
 
        for (i = 0; i < (ETH_ALEN >> 1); i++) {
-               tmp = read_srom(dev, DE4X5_APROM, ((SROM_HWADD >> 1) + i));
+               tmp = read_srom(dev, DE4X5_APROM, (SROM_HWADD >> 1) + i);
                *p = le16_to_cpu(tmp);
                j += *p++;
        }
 
-       if ((j == 0) || (j == 0x2fffd)) {
-               memset (dev->enetaddr, 0, ETH_ALEN);
-               debug ("Warning: can't read HW address from SROM.\n");
-               goto Done;
-       }
-
-       return;
-
-Done:
+       if (!j || j == 0x2fffd) {
+               memset(dev->enetaddr, 0, ETH_ALEN);
+               debug("Warning: can't read HW address from SROM.\n");
 #ifdef UPDATE_SROM
-       update_srom(dev, bis);
+               update_srom(dev, bis);
 #endif
-       return;
+       }
 }
 
 #ifdef UPDATE_SROM
 static void update_srom(struct eth_device *dev, bd_t *bis)
 {
-       int i;
        static unsigned short eeprom[0x40] = {
                0x140b, 0x6610, 0x0000, 0x0000, /* 00 */
                0x0000, 0x0000, 0x0000, 0x0000, /* 04 */
@@ -658,16 +666,17 @@ static void update_srom(struct eth_device *dev, bd_t *bis)
                0x0000, 0x0000, 0x0000, 0x4e07, /* 3c */
        };
        uchar enetaddr[6];
+       int i;
 
        /* Ethernet Addr... */
        if (!eth_env_get_enetaddr("ethaddr", enetaddr))
                return;
+
        eeprom[0x0a] = (enetaddr[1] << 8) | enetaddr[0];
        eeprom[0x0b] = (enetaddr[3] << 8) | enetaddr[2];
        eeprom[0x0c] = (enetaddr[5] << 8) | enetaddr[4];
 
-       for (i=0; i<0x40; i++) {
+       for (i = 0; i < 0x40; i++)
                write_srom(dev, DE4X5_APROM, i, eeprom[i]);
-       }
 }
-#endif /* UPDATE_SROM */
+#endif /* UPDATE_SROM */
-- 
2.25.1

Reply via email to