[PATCH u-boot-marvell 08/11] ata: ahci_mvebu: add PHY support

[Marek Behún]

Use generic-phy API to power on SATA PHY.

Signed-off-by: Marek Behún <marek.be...@nic.cz>
---
 drivers/ata/ahci_mvebu.c | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/drivers/ata/ahci_mvebu.c b/drivers/ata/ahci_mvebu.c
index 48a9d00d14..d229ab84ed 100644
--- a/drivers/ata/ahci_mvebu.c
+++ b/drivers/ata/ahci_mvebu.c
@@ -6,6 +6,7 @@
 #include <common.h>
 #include <ahci.h>
 #include <dm.h>
+#include <generic-phy.h>
 
 /*
  * Dummy implementation that can be overwritten by a board
@@ -30,14 +31,48 @@ static int mvebu_ahci_bind(struct udevice *dev)
        return 0;
 }
 
+static int mvebu_ahci_phy_power_on(struct udevice *dev)
+{
+       struct phy phy;
+       int ret;
+
+       ret = generic_phy_get_by_index(dev, 0, &phy);
+       if (ret == -ENOENT)
+               return 0;
+
+       ret = generic_phy_init(&phy);
+       if (ret)
+               return ret;
+
+       ret = generic_phy_set_mode(&phy, PHY_MODE_SATA, 0);
+       if (ret)
+               goto err;
+
+       ret = generic_phy_power_on(&phy);
+       if (ret)
+               goto err;
+
+       return 0;
+
+err:
+       generic_phy_exit(&phy);
+       return ret;
+}
+
 static int mvebu_ahci_probe(struct udevice *dev)
 {
+       int ret;
+
        /*
         * Board specific SATA / AHCI enable code, e.g. enable the
         * AHCI power or deassert reset
         */
        board_ahci_enable();
 
+       ret = mvebu_ahci_phy_power_on(dev);
+       if (ret)
+               return ret;
+
        ahci_probe_scsi(dev, (ulong)devfdt_get_addr_ptr(dev));
 
        return 0;
-- 
2.24.1