+ Lokesh
On 04/17/2020 11:12 AM, Murali Karicheri wrote:
In RGMII mode the 10Mbps link speed is supported only when CPSW2G MAC SL is
configured for External Control ("in band") mode
CPSW_PN_MAC_CONTROL_REG.CTL_EN(18) = 1
Hence update am65_cpsw_update_link() to follow documentation.
Signed-off-by: Murali Karicheri <m-kariche...@ti.com>
---
drivers/net/ti/am65-cpsw-nuss.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/ti/am65-cpsw-nuss.c b/drivers/net/ti/am65-cpsw-nuss.c
index 2b77213001..7531a07203 100644
--- a/drivers/net/ti/am65-cpsw-nuss.c
+++ b/drivers/net/ti/am65-cpsw-nuss.c
@@ -61,6 +61,7 @@
#define AM65_CPSW_MACSL_CTL_REG 0x0
#define AM65_CPSW_MACSL_CTL_REG_IFCTL_A BIT(15)
+#define AM65_CPSW_MACSL_CTL_EXT_EN BIT(18)
#define AM65_CPSW_MACSL_CTL_REG_GIG BIT(7)
#define AM65_CPSW_MACSL_CTL_REG_GMII_EN BIT(5)
#define AM65_CPSW_MACSL_CTL_REG_LOOPBACK BIT(1)
@@ -187,6 +188,9 @@ static int am65_cpsw_update_link(struct am65_cpsw_priv
*priv)
AM65_CPSW_MACSL_CTL_REG_GMII_EN;
if (phy->speed == 1000)
mac_control |= AM65_CPSW_MACSL_CTL_REG_GIG;
+ if (phy->speed == 10 && phy_interface_is_rgmii(phy))
+ /* Can be used with in band mode only */
+ mac_control |= AM65_CPSW_MACSL_CTL_EXT_EN;
if (phy->duplex == DUPLEX_FULL)
mac_control |= AM65_CPSW_MACSL_CTL_REG_FULL_DUPLEX;
if (phy->speed == 100)
--
Murali Karicheri
Texas Instruments
