Dear Marek, > From: Marek Vasut <ma...@denx.de> > Sent: mercredi 22 avril 2020 17:19 > > On 4/22/20 5:04 PM, Patrick DELAUNAY wrote: > > Hi Marek, > > Hi, > > >> From: Marek Vasut <ma...@denx.de> > >> Sent: mercredi 22 avril 2020 13:18 > >> > >> The AV96 board does exist in multiple variants. To cater for all of > >> them, implement board code handling. There are two GPIOs which code > >> the type of the board, read them out and use the value to pick the correct > device tree from an fitImage. > >> > >> Reviewed-by: Patrick Delaunay <patrick.delau...@st.com> > >> Signed-off-by: Marek Vasut <ma...@denx.de> > >> Cc: Manivannan Sadhasivam <manivannan.sadhasi...@linaro.org> > >> Cc: Patrick Delaunay <patrick.delau...@st.com> > >> Cc: Patrice Chotard <patrice.chot...@st.com> > >> --- > >> V2: No change > >> V3: Drop dm-pre-reloc and gpio-cells from config node > >> --- > >> arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi | 1 + > >> .../stm32mp15xx-dhcor-avenger96-u-boot.dtsi | 1 + > >> arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi | 7 +++ > >> board/dhelectronics/dh_stm32mp1/Kconfig | 2 +- > >> board/dhelectronics/dh_stm32mp1/board.c | 61 +++++++++++++++++++ > >> .../dh_stm32mp1/u-boot-dhcom.its | 39 ++++++++++++ > >> .../dh_stm32mp1/u-boot-dhcor.its | 39 ++++++++++++ > >> configs/stm32mp15_dhcom_basic_defconfig | 3 + > >> configs/stm32mp15_dhcor_basic_defconfig | 3 + > >> include/configs/dh_stm32mp1.h | 15 +++++ > >> 10 files changed, 170 insertions(+), 1 deletion(-) create mode > >> 100644 board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its > >> create mode 100644 board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its > >> create mode 100644 include/configs/dh_stm32mp1.h > >> > > > > I have 2 compilation issue on this patch with buildman > >
[...] > > > > And you are the first user of CONFIG_SPL_FIT_SOURCE... > > Most certainly not the first, this was used before. > At least the last one 😊 checked by grep. > > I want to propose to copy the file with: > > > > ----------------------------------- Makefile [....] > > But then you need to update the patch in .its files.... > > > > => remove no more necessary "../../../" > > Cam you send this patch, so I can rebase on top of it ? Done in : [PATCH] Makefile: copy SPL_FIT_SOURCE in build directory http://patchwork.ozlabs.org/project/uboot/patch/20200423093845.1.Idf086bdb530238139f0066b3fecc01529d7c0b7d@changeid/ Regards Patrick