Hi Jeff, > -----Original Message----- > From: Jeff Carr [mailto:basilarc...@gmail.com] > Sent: Tuesday, August 17, 2010 6:53 PM > To: Martinez, Aldo > Cc: u-boot@lists.denx.de > Subject: Re: [U-Boot] [PATCH 0/2 v5][U-BOOT] Zoom3: Add support for > OMAP3630 Zoom3 board. > > On Tue, Aug 17, 2010 at 14:43, Jeff Carr <basilarc...@gmail.com> wrote: > > On Tue, Aug 17, 2010 at 08:34, Martinez, Aldo <aldo.cedi...@ti.com> > wrote: > > > >> I wonder what is the status of this patch? > > I tried this patch today and DRAM seems to not work after u-boot > loads. Strange. I did: > > git clone git://git.denx.de/u-boot.git > git pull git://git.denx.de/u-boot-ti.git master > patch < your_patch_from_this_thread.diff > export CROSS_COMPILE=arm-none-linux-gnueabi- > make omap3_zoom3_config > make > > Then the output looks like: > > U-Boot 2010.06-00691-g30b170e-dirty (Aug 17 2010 - 15:58:42) > > OMAP3530-GP ES2.0, CPU-OPP2 L3-165MHz > OMAP3 Zoom3 + LPDDR/NAND > DRAM: 640 MiB > NAND: 512 MiB > In: serial > Out: serial > Err: serial > Board revision Production > Die ID #782400011ff00000015a5e591101d014 > Hit any key to stop autoboot: 0 > OMAP3 Zoom3 #bdinfo > arch_number = 0x000009A0 > env_t = 0x00000000 > boot_params = 0x80000100 > DRAM bank = 0x00000000 > -> start = 0x80000000 > -> size = 0x20000000 > DRAM bank = 0x00000001 > -> start = 0xA0000000 > -> size = 0x08000000 > baudrate = 115200 bps > OMAP3 Zoom3 #md 0x80001000 > 80001000: I'll take a look at this, thanks for noting it.
Best regards, Aldo Brett _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot