On 2020/4/25 下午7:03, Jagan Teki wrote:
Add PCIE_PHY clock disablement support on rk3399 clock driver. This would trigger if the PCIe PHY driver failed to initialize or power on the PHY. Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.y...@rock-chips.com> Thanks, - Kever
--- drivers/clk/rockchip/clk_rk3399.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c index 8e069fbade..2d447f96f7 100644 --- a/drivers/clk/rockchip/clk_rk3399.c +++ b/drivers/clk/rockchip/clk_rk3399.c @@ -1085,6 +1085,22 @@ static int rk3399_clk_enable(struct clk *clk) return 0; }+static int rk3399_clk_disable(struct clk *clk)+{ + struct rk3399_clk_priv *priv = dev_get_priv(clk->dev); + + switch (clk->id) { + case SCLK_PCIEPHY_REF: + rk_clrreg(&priv->cru->clksel_con[18], BIT(7)); + break; + default: + debug("%s: unsupported clk %ld\n", __func__, clk->id); + return -ENOENT; + } + + return 0; +} + static struct clk_ops rk3399_clk_ops = { .get_rate = rk3399_clk_get_rate, .set_rate = rk3399_clk_set_rate, @@ -1092,6 +1108,7 @@ static struct clk_ops rk3399_clk_ops = { .set_parent = rk3399_clk_set_parent, #endif .enable = rk3399_clk_enable, + .disable = rk3399_clk_disable, };#ifdef CONFIG_SPL_BUILD
