[PATCH 6/7] cpu: imx_cpu: Print the CPU temperature for iMX8QM A72

[Peng Fan]

From: Ye Li <ye...@nxp.com>

iMX8QM registers two thermal devices for CPUs, get the temperature
from "cpu-thermal1" device for A72

Signed-off-by: Ye Li <ye...@nxp.com>
Signed-off-by: Peng Fan <peng....@nxp.com>
---
 drivers/cpu/imx8_cpu.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/cpu/imx8_cpu.c b/drivers/cpu/imx8_cpu.c
index 525c28bc4b..d99d9aacd9 100644
--- a/drivers/cpu/imx8_cpu.c
+++ b/drivers/cpu/imx8_cpu.c
@@ -61,13 +61,17 @@ const char *get_core_name(struct udevice *dev)
 }
 
 #if IS_ENABLED(CONFIG_IMX_SCU_THERMAL)
-static int cpu_imx_get_temp(void)
+static int cpu_imx_get_temp(struct cpu_imx_platdata *plat)
 {
        struct udevice *thermal_dev;
        int cpu_tmp, ret;
 
-       ret = uclass_get_device_by_name(UCLASS_THERMAL, "cpu-thermal0",
-                                       &thermal_dev);
+       if (!strcmp(plat->name, "A72"))
+               ret = uclass_get_device_by_name(UCLASS_THERMAL, "cpu-thermal1",
+                                               &thermal_dev);
+       else
+               ret = uclass_get_device_by_name(UCLASS_THERMAL, "cpu-thermal0",
+                                               &thermal_dev);
 
        if (!ret) {
                ret = thermal_get_temp(thermal_dev, &cpu_tmp);
@@ -80,7 +84,7 @@ static int cpu_imx_get_temp(void)
        return cpu_tmp;
 }
 #else
-static int cpu_imx_get_temp(void)
+static int cpu_imx_get_temp(struct cpu_imx_platdata *plat)
 {
        return 0;
 }
@@ -89,7 +93,7 @@ static int cpu_imx_get_temp(void)
 int cpu_imx_get_desc(struct udevice *dev, char *buf, int size)
 {
        struct cpu_imx_platdata *plat = dev_get_platdata(dev);
-       int ret;
+       int ret, temp;
 
        if (size < 100)
                return -ENOSPC;
@@ -98,9 +102,13 @@ int cpu_imx_get_desc(struct udevice *dev, char *buf, int 
size)
                       plat->type, plat->rev, plat->name, plat->freq_mhz);
 
        if (IS_ENABLED(CONFIG_IMX_SCU_THERMAL)) {
+               temp = cpu_imx_get_temp(plat);
                buf = buf + ret;
                size = size - ret;
-               ret = snprintf(buf, size, " at %dC", cpu_imx_get_temp());
+               if (temp != 0xdeadbeef)
+                       ret = snprintf(buf, size, " at %dC", temp);
+               else
+                       ret = snprintf(buf, size, " - invalid sensor data");
        }
 
        snprintf(buf + ret, size - ret, "\n");
-- 
2.16.4