On 5/1/20 7:48 PM, Frank Wunderlich wrote: >>>> Gesendet: Freitag, 01. Mai 2020 um 17:39 Uhr >>>> Von: "Marek Vasut" <ma...@denx.de> >>>> Build failed, please fix: >>>> https://gitlab.denx.de/u-boot/custodians/u-boot-usb/pipelines/3054 > > could you try if all tests passing after this Patch? > > regards Frank > > commit 9c4a3633e92dbcd51aa60ff14693adc900e3c816 > Author: Frank Wunderlich <fran...@public-files.de> > Date: Fri May 1 19:32:12 2020 +0200 > > fix build-error for xilinx-board caused by xhci-Patches > > Fixes: "usb: dwc3: use the phy bulk API to get phys" > > diff --git a/drivers/usb/host/xhci-dwc3.c b/drivers/usb/host/xhci-dwc3.c > index 9fcfa39d4b..563db1a426 100644 > --- a/drivers/usb/host/xhci-dwc3.c > +++ b/drivers/usb/host/xhci-dwc3.c > @@ -19,8 +19,7 @@ > #include <linux/usb/otg.h> > > struct xhci_dwc3_platdata { > - struct phy *usb_phys; > - int num_phys; > + struct phy_bulk *usb_phys; > }; > > void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode) > @@ -125,7 +124,7 @@ static int xhci_dwc3_probe(struct udevice *dev) > hcor = (struct xhci_hcor *)((uintptr_t)hccr + > HC_LENGTH(xhci_readl(&(hccr)->cr_capbase))); > > - ret = dwc3_setup_phy(dev, &plat->usb_phys, &plat->num_phys); > + ret = dwc3_setup_phy(dev, plat->usb_phys); > if (ret && (ret != -ENOTSUPP)) > return ret; > > @@ -168,7 +167,7 @@ static int xhci_dwc3_remove(struct udevice *dev) > { > struct xhci_dwc3_platdata *plat = dev_get_platdata(dev); > > - dwc3_shutdown_phy(dev, plat->usb_phys, plat->num_phys); > + dwc3_shutdown_phy(dev, plat->usb_phys); > > return xhci_deregister(dev); > }
It's a build failure, build it for versal_virt and see if the error is gone. Is it ?