> From: Anatolij Gustschin <ag...@denx.de> > Boards may extend or re-define the boot list in their board_boot_order() > function by modifying spl_boot_list. E.g. a board might boot SPL from a > slow SPI NOR flash and then load the U-Boot from an eMMC or SD-card. > Or it might use additional MMC boot device in spl_boot_list for cases > when the image in SPI NOR flash is not found, so it could fall back to > eMMC, SD-card or another boot device. > Getting the MMC boot mode in spl_mmc will fail when we are trying to > boot from an MMC device in the spl_boot_list and the original board > boot mode (as returned by spl_boot_device()) is not an MMC boot mode. > Fix it by checking the asked MMC boot device from the spl_mmc_boot_mode() > argument. > Signed-off-by: Anatolij Gustschin <ag...@denx.de> Applied to u-boot-imx, master, thanks !
Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de =====================================================================