On Sun, 3 May 2020 at 09:28, Zhiqiang Hou <zhiqiang....@nxp.com> wrote: > > From: Hou Zhiqiang <zhiqiang....@nxp.com> > > Change the compatible string to "fsl,etsec2" for the Ethernet ports, > which is used in the current driver's match table. > > Fixes: 69a00875e3db ("doc: dt-bindings: Describe Freescale TSEC ethernet > controller") > Signed-off-by: Hou Zhiqiang <zhiqiang....@nxp.com> > ---
Acked-by: Vladimir Oltean <vladimir.olt...@nxp.com> Although I am unclear how the G&D MPC8308 boards (arch/powerpc/dts/gdsys/mpc8308.dtsi) have ever probed their TSEC interfaces. Probably not based on DM, since the fsl,tsec compatible string has never been supported by the mainline tsec driver. > doc/device-tree-bindings/net/fsl-tsec-phy.txt | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/doc/device-tree-bindings/net/fsl-tsec-phy.txt > b/doc/device-tree-bindings/net/fsl-tsec-phy.txt > index 59989e3b09..8e8574bc97 100644 > --- a/doc/device-tree-bindings/net/fsl-tsec-phy.txt > +++ b/doc/device-tree-bindings/net/fsl-tsec-phy.txt > @@ -2,7 +2,7 @@ > > Properties: > > - - compatible : Should be "fsl,tsec" > + - compatible : Should be "fsl,etsec2" > - reg : Offset and length of the register set for the device > - phy-handle : See ethernet.txt file in the same directory. > - phy-connection-type : See ethernet.txt file in the same directory. This > @@ -12,7 +12,7 @@ Properties: > > Example: > ethernet@24000 { > - compatible = "fsl,tsec"; > + compatible = "fsl,etsec2"; > reg = <0x24000 0x1000>; > phy-handle = <&phy0>; > phy-connection-type = "sgmii"; > -- > 2.17.1 >