[PATCH v8 10/21] clk: sifive: fu540-prci: Add ddr clock initialization in SPL

[Pragnesh Patel]

Add ddr clock release reset for SPL

Signed-off-by: Pragnesh Patel <pragnesh.pa...@sifive.com>
---
 drivers/clk/sifive/fu540-prci.c | 59 +++++++++++++++++++++++++++++----
 1 file changed, 53 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/sifive/fu540-prci.c b/drivers/clk/sifive/fu540-prci.c
index bf06c3a3bb..033562274e 100644
--- a/drivers/clk/sifive/fu540-prci.c
+++ b/drivers/clk/sifive/fu540-prci.c
@@ -152,6 +152,12 @@
 #define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK \
                        (0x1 << PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT)
 
+/* PROCMONCFG */
+#define PRCI_PROCMONCFG_OFFSET         0xF0
+#define PRCI_PROCMONCFG_CORE_CLOCK_SHIFT       24
+#define PRCI_PROCMONCFG_CORE_CLOCK_MASK \
+                       (0x1 << PRCI_PROCMONCFG_CORE_CLOCK_SHIFT)
+
 /*
  * Private structures
  */
@@ -176,6 +182,7 @@ struct __prci_data {
  * @disable_bypass: fn ptr to code to not bypass the WRPLL (or NULL)
  * @cfg0_offs: WRPLL CFG0 register offset (in bytes) from the PRCI base address
  * @cfg1_offs: WRPLL CFG1 register offset (in bytes) from the PRCI base address
+ * @release_reset: fn ptr to code to release clock reset
  *
  * @enable_bypass and @disable_bypass are used for WRPLL instances
  * that contain a separate external glitchless clock mux downstream
@@ -187,6 +194,9 @@ struct __prci_wrpll_data {
        void (*disable_bypass)(struct __prci_data *pd);
        u8 cfg0_offs;
        u8 cfg1_offs;
+#ifdef CONFIG_SPL_BUILD
+       void (*release_reset)(struct __prci_data *pd);
+#endif
 };
 
 struct __prci_clock;
@@ -476,6 +486,11 @@ static int sifive_fu540_prci_clock_enable(struct 
__prci_clock *pc, bool enable)
 
        if (enable) {
                __prci_wrpll_write_cfg1(pd, pwd, PRCI_COREPLLCFG1_CKE_MASK);
+
+#ifdef CONFIG_SPL_BUILD
+               if (pwd->release_reset)
+                       pwd->release_reset(pd);
+#endif
        } else {
                u32 r;
 
@@ -495,11 +510,6 @@ static const struct __prci_clock_ops 
sifive_fu540_prci_wrpll_clk_ops = {
        .enable_clk = sifive_fu540_prci_clock_enable,
 };
 
-static const struct __prci_clock_ops sifive_fu540_prci_wrpll_ro_clk_ops = {
-       .recalc_rate = sifive_fu540_prci_wrpll_recalc_rate,
-       .enable_clk = sifive_fu540_prci_clock_enable,
-};
-
 /* TLCLKSEL clock integration */
 
 static unsigned long sifive_fu540_prci_tlclksel_recalc_rate(
@@ -521,6 +531,40 @@ static const struct __prci_clock_ops 
sifive_fu540_prci_tlclksel_clk_ops = {
        .recalc_rate = sifive_fu540_prci_tlclksel_recalc_rate,
 };
 
+#ifdef CONFIG_SPL_BUILD
+/**
+ * __prci_ddr_release_reset() - Release DDR reset
+ * @pd: struct __prci_data * for the PRCI containing the DDRCLK mux reg
+ *
+ */
+static void __prci_ddr_release_reset(struct __prci_data *pd)
+{
+       u32 v;
+
+       v = __prci_readl(pd, PRCI_DEVICESRESETREG_OFFSET);
+       v |= PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_MASK;
+       __prci_writel(v, PRCI_DEVICESRESETREG_OFFSET, pd);
+
+       /* HACK to get the '1 full controller clock cycle'. */
+       asm volatile ("fence");
+       v = __prci_readl(pd, PRCI_DEVICESRESETREG_OFFSET);
+       v |= (PRCI_DEVICESRESETREG_DDR_AXI_RST_N_MASK |
+                       PRCI_DEVICESRESETREG_DDR_AHB_RST_N_MASK |
+                       PRCI_DEVICESRESETREG_DDR_PHY_RST_N_MASK);
+       __prci_writel(v, PRCI_DEVICESRESETREG_OFFSET, pd);
+
+       /* HACK to get the '1 full controller clock cycle'. */
+       asm volatile ("fence");
+
+       /*
+        * These take like 16 cycles to actually propagate. We can't go sending
+        * stuff before they come out of reset. So wait.
+        */
+       for (int i = 0; i < 256; i++)
+               asm volatile ("nop");
+}
+#endif
+
 /*
  * PRCI integration data for each WRPLL instance
  */
@@ -535,6 +579,9 @@ static struct __prci_wrpll_data __prci_corepll_data = {
 static struct __prci_wrpll_data __prci_ddrpll_data = {
        .cfg0_offs = PRCI_DDRPLLCFG0_OFFSET,
        .cfg1_offs = PRCI_DDRPLLCFG1_OFFSET,
+#ifdef CONFIG_SPL_BUILD
+       .release_reset = __prci_ddr_release_reset,
+#endif
 };
 
 static struct __prci_wrpll_data __prci_gemgxlpll_data = {
@@ -556,7 +603,7 @@ static struct __prci_clock __prci_init_clocks[] = {
        [PRCI_CLK_DDRPLL] = {
                .name = "ddrpll",
                .parent_name = "hfclk",
-               .ops = &sifive_fu540_prci_wrpll_ro_clk_ops,
+               .ops = &sifive_fu540_prci_wrpll_clk_ops,
                .pwd = &__prci_ddrpll_data,
        },
        [PRCI_CLK_GEMGXLPLL] = {
-- 
2.17.1