Dear sandeep suresh, > Dear Reinhard Meyer, > Appreciate your quick response. I had done this earlier > before posting this mail, but with the same problem: > step 1) export PATH=$PATH:/work/arm/4.3.2/bin > step 2) make distclean > step 3) make AT91SAM9260ek_config > step 4)make > Can you please help me further, please.
I can't help you with the following tasks: 1. find out what are the differences between 9260-EK and 9G20-EK ? 2. find out what subtle differences might exist between 9260 and 9G20 SoC? It might be more than "AT91SAM9G20 = 400MHz version of AT91SAM9260"... And I can't see in above transcript where you set the #define I mentioned. "#ifdef CONFIG_AT91SAM9G20EK" exists in various places in the source, but I do not know if that ever was a really working port or just someone starting on it. Reinhard PS: it is mandatory to post replies to the mailing list as well! _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
