On Fri, May 8, 2020 at 11:39 PM Belisko Marek <marek.beli...@gmail.com> wrote: > > Hi Matthias, > > On Fri, May 8, 2020 at 11:28 PM Matthias Brugger <mbrug...@suse.com> wrote: > > > > Hi Marek, > > > > On 08/05/2020 21:52, Belisko Marek wrote: > > > On Wed, May 6, 2020 at 11:02 PM Belisko Marek <marek.beli...@gmail.com> > > > wrote: > > >> > > >> On Tue, May 5, 2020 at 10:18 PM Belisko Marek <marek.beli...@gmail.com> > > >> wrote: > > >>> > > >>> Hi, > > >>> > > >>> I'm trying to run 2019.07 u-boot on raspberrypi cm3 module but I got > > >>> no feedback on console. When used 2018.01 it boots fine. Probably I > > >>> need to do git bisect but maybe someone have some idea or experience > > >>> what can cause that. Thanks. > > >> I give a try 2020.01 and I got only this: > > >> U-Boot 2020.01 (May 06 2020 - 20:09:45 +0000) > > >> > > >> DRAM: 948 MiB > > >> RPI Compute Module 3 (0xa020a0) > > >> > > >> I'll try to debug it and let you know. > > > Debug messages shows this: > > > https://pastebin.com/2SwNzrb1 > > > > > > I tried to debug but I have no clue what is going one there. > > > > > > Also u-boot 2019.07 is not working at all on cm3 due to this commit > > > (after bisect when reverted u-boot start working again): > > > 143256b353c4d2ad1cf5e5e63b38410188b35e49 - fdt: update bcm283x device > > > tree sources to Linux 5.1-rc6 state > > > > > > Any ideas hint how to resolve this issue? Thanks. > > > > > > > Can you try to cherry-pick the following two patches to your tree: > > 5051377a0b ("arm: dts: bcm283x: Rename U-Boot file") > > 89e47e8eb6 ("fdt: fix bcm283x dm-pre-reloc definitions") > But those are present in 2020.01 and this version at least print > something to console but stuck somewhere (pls see pastebin log with > debug enabled) > I prefer to run 2020.01 ;). Thanks. Any other stuff I can try to make it working in 2020.01? Could that be firmware issue somehow? Thanks. > > > > Regards, > > Matthias > > BR, > > marek
BR, marek