Hello Patrick,
Am 14.05.2020 um 15:47 schrieb Patrick DELAUNAY:
Hi Heiko
From: Heiko Schocher <h...@denx.de>
Sent: mardi 12 mai 2020 09:32
Hello tom, Patrick,
Am 12.05.2020 um 08:26 schrieb Heiko Schocher:
Hello Tom, Patrick,
Am 27.04.2020 um 08:47 schrieb Heiko Schocher:
Hello Tom, Patrick,
Am 27.04.2020 um 07:16 schrieb Heiko Schocher:
Hello Tom,
Am 24.04.2020 um 19:45 schrieb Tom Rini:
On Wed, Feb 05, 2020 at 07:19:58AM +0100, Heiko Schocher wrote:
currently gpio hog function is not tested with "ut dm gpio"
so add some basic tests for gpio hog functionality.
For this enable GPIO_HOG in sandbox_defconfig, add in DTS some
gpio hog entries, and add testcase in "ut dm gpio" command.
Signed-off-by: Heiko Schocher <h...@denx.de>
Reviewed-by: Simon Glass <s...@chromium.org>
This no longer applies cleanly/obviously, please rebase, thanks!
Done, unfortunately, aristainetos2 does not boot anymore... got:
├─UBOOT (ari-ub)
│ │ <> ### Connect to "aristainetos" using command:
/usr/bin/telnet ts2 7015 │ │ <> Trying 192.168.1.202...
│ │ <> Connected to ts2.
│ │ <> Escape character is '^]'.
│ │ <> <debug_uart> unrecognized JEDEC id bytes: 00, 00, 00 │
│ <> *** Warning - spi_flash_probe_bus_cs() failed, using default
environment │ │ <> │ │ <> alloc space exhausted │ │
<> alloc space exhausted │ │ <> alloc space exhausted │ │
<> himport_r: can't insert "loadbootscriptUSB=ext4load usb 0 ${loadaddr}
${script};"
into hash table
│ │ <> alloc space exhausted
│ │ <> alloc space exhausted
Seems early SPI NOR detection fails ...
Have to start bisect, try to find some time...
Ok, commit:
commit 788ea834124bd6169ea10b2d37d5de48a2dd28a0 (bisect-788ea83412)
Author: Patrick Delaunay <patrick.delau...@st.com>
Date: Mon Jan 13 11:35:03 2020 +0100
gpio: add function _dm_gpio_set_dir_flags
Introduce the function _dm_gpio_set_dir_flags to set dir flags
without check if the GPIO is reserved.
Separate the reserved check for "set_dir" and "set_dir_flags".
This patch is a preliminary step to add new ops.
Signed-off-by: Patrick Delaunay <patrick.delau...@st.com>
Reviewed-by: Simon Glass <s...@chromium.org>
breaks the aristainetos2 board ... reverting this patch (and
therefore I needed some more patches to revert as it was a patchseries):
* dbf06f0e6c - (HEAD -> aristainetos-denx) Revert "gpio: add function
_gpio_get_value" (vor 5
Minuten) <Heiko Schocher>
* 5c85a7cc26 - Revert "gpio: add function _dm_gpio_set_dir_flags"
(vor 5 Minuten) <Heiko Schocher>
* c226d65d88 - Revert "gpio: add function check_dir_flags" (vor 5
Minuten) <Heiko Schocher>
* 1423a40c69 - Revert "gpio: add helper GPIOD_FLAGS_OUTPUT" (vor 5
Minuten) <Heiko Schocher>
* fb0176450f - Revert "gpio: update dir_flags management" (vor 5
Minuten) <Heiko Schocher>
* 9d74cc5ecb - Revert "gpio: add support of new GPIO direction flag"
(vor 5 Minuten) <Heiko Schocher>
* 3bf361c206 - Revert "gpio: add ops to get dir flags" (vor 5
Minuten) <Heiko Schocher>
* beb6d3c2d9 - Revert "gpio: add ops to set dir flags" (vor 5
Minuten) <Heiko Schocher>
And board boots again fine ...
I do not see, why commit 788ea834124bd6169ea10b2d37d5de48a2dd28a0
makes SPI not working anymore ...
Any ideas?
Just looking with sandbox into it ... added debug patch:
diff --git a/drivers/gpio/gpio-uclass.c b/drivers/gpio/gpio-uclass.c
index 3fb6b6e69c..2e68f558bd 100644
--- a/drivers/gpio/gpio-uclass.c
+++ b/drivers/gpio/gpio-uclass.c
@@ -273,9 +273,11 @@ static int gpio_hog_probe(struct udevice *dev)
struct gpio_hog_priv *priv = dev_get_priv(dev);
int ret;
+ printf("%s: --------- dev->name: %s nr: %d flag: %d platflags:
+%d\n", __func__, dev->name,
plat->val[0], plat->val[1], plat->gpiod_flags);
ret = gpio_dev_request_index(dev->parent, dev->name,
"gpio-hog",
plat->val[0], plat->gpiod_flags,
plat->val[1], &priv->gpiod);
+ printf("%s: --------- gpiod: %p\n", __func__, &priv->gpiod);
if (ret < 0) {
debug("%s: node %s could not get gpio.\n", __func__,
dev->name);
@@ -291,6 +293,10 @@ static int gpio_hog_probe(struct udevice *dev)
}
}
+ if (1) {
+ struct gpio_desc *gpiod = &priv->gpiod;
+ printf("%s: gpiod_flags: %x\n", __func__,
+gpiod->flags);
+ }
return 0;
}
and see:
=> ut dm gpio
Test: dm_test_gpio: gpio.c
gpio_hog_probe_all: ---------
gpio_hog_probe: --------- dev->name: hog_input_active_low nr: 0 flag:
1 platflags: 4
gpio_hog_probe: --------- gpiod: 0000000015901050
gpio_hog_probe: gpiod_flags: 8
gpio_hog_probe: --------- dev->name: hog_input_active_high nr: 1 flag:
0 platflags: 4
gpio_hog_probe: --------- gpiod: 00000000159010a0
gpio_hog_probe: gpiod_flags: 0
gpio_hog_probe: --------- dev->name: hog_output_low nr: 2 flag: 0
platflags: 2
gpio_hog_probe: --------- gpiod: 00000000159010f0
gpio_hog_probe: gpiod_flags: 0
gpio_hog_probe: --------- dev->name: hog_output_high nr: 3 flag: 0
platflags: 2
gpio_hog_probe: --------- gpiod: 0000000015901130
gpio_hog_probe: gpiod_flags: 0
gpio_hog_lookup_name: name: hog_input_active_low
gpio_hog_lookup_name: --------- gpiod: 15901050 test/dm/gpio.c:115,
dm_test_gpio(): GPIOD_IS_IN | GPIOD_ACTIVE_LOW == desc->flags:
Expected 0xc (12), got 0x8 (8)
It looks like the plat->gpiod_flags are not written anymore into
gpiod through the gpio_dev_request_index() function ...
Ok, I did now the following change:
https://github.com/hsdenx/u-boot-test/commits/aristainetos-gpio-v4
$ git show c4a3295fa6
commit c4a3295fa67f23408ba3ff5552532222f48142f6
Author: Heiko Schocher <h...@denx.de>
Date: Tue May 12 08:56:40 2020 +0200
gpio-uclass.c: save the GPIOD flags also in the gpio descriptor
save the GPIOD_ flags also in the gpio descriptor.
Signed-off-by: Heiko Schocher <h...@denx.de>
Patch-cc: Patrick Delaunay <patrick.delau...@st.com>
Series-changes: 4
- new in version 4
diff --git a/drivers/gpio/gpio-uclass.c b/drivers/gpio/gpio-uclass.c index
757ab7106e..fc94334160 100644
--- a/drivers/gpio/gpio-uclass.c
+++ b/drivers/gpio/gpio-uclass.c
@@ -572,6 +572,9 @@ static int _dm_gpio_set_dir_flags(struct gpio_desc
*desc, ulong flags)
return ret;
}
+ /* save the flags also in descriptor */
+ desc->flags = flags;
+
/* GPIOD_ are directly managed by driver in set_dir_flags*/
if (ops->set_dir_flags) {
ret = ops->set_dir_flags(dev, desc->offset, flags);
and with it, the sandbox tests and the aristainetos2 board works fine again. I
have
just started a travis build for it:
https://travis-ci.org/github/hsdenx/u-boot-test/builds/685995112
If no errors pop up, I send v4 version of my patchseries.
In my serie, normally the update of the desc->flags was done in
dm_gpio_set_dir_flags()
with the line
/* update the descriptor flags */
if (ret)
desc->flags = flags;
not needed in dm_gpio_set_dir (as requested with desc->flags)
At first lok, I don't understood the execution path to have desc->flags not
updated...
But in fact I inverse the test (again :-<)
/* update the descriptor flags */
+ if (!ret)
- if (ret)
desc->flags = flags;
Ok, this fix works also, thanks!
but this test could move in _ dm_gpio_set_deit to be more clear,
but I think we need continue to test ret value before to update descriptor
Moved this into _dm_gpio_set_dir_flags()
Sorry for the issue.
No problem, more problematic was, that I missed to add sandbox
tests before and patch which adds them is pending for a while!
Do you prefer that send a sperate patch to correct this error ?
I would see this in this patchseries, travis build runs, and I post
v5 if all is fine, thanks!
https://travis-ci.org/github/hsdenx/u-boot-test/builds/687305014
bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: h...@denx.de