Thanks Richard for the response. On 5/19/20, Richard Weinberger <richard.weinber...@gmail.com> wrote: > Neither UBI nor UBIFS care about ECC. The MTD stack does. > If you write something in Linux you cannot read back in u-boot a common > problem is that u-boot and Linux use different MTD settings (layout, > ECC, etc...).
That is exactly the problem I have, the MTD layout in both Linux and u-boot is the same: # mtdinfo Count of MTD devices: 3 Present MTD devices: mtd0, mtd1, mtd2 Sysfs interface supported: yes Are there any ways or tools in Linux to change MTD settings (most likely the ECC or DTB) to the same setting in u-boot? I do have mtd and fw_setenv in Linux. Thank you so much. Kind regards, - jh -- "A man can fail many times, but he isn't a failure until he begins to blame somebody else." -- John Burroughs