Hi Simon,
Am 2020-04-24 16:17, schrieb Michael Walle:
Hi Simon,
Am 2020-04-20 01:38, schrieb Simon Glass:
[..snip..]
> uclass 31: eth
> 0 * smsc95xx_eth @ 3db69ac0, seq 0, (req -1)
Shouldn't this be "req 0" if the ethernet alias is actually matched.
Does u-boot actually supports matching usb nodes to devices? If not,
shouldn't the alias be removed then?
That being said, it is still strange why the bootloader doesn't find
ethernet-1 then. I've tried with my board, no native ethernet support
and an usb network dongle which works as expected (well the dongle
seems to have some issues to actually transfer frames).
It is a bit strange. Removing the alias does not fix it though.
Are you sure you removed the alias in the correct file? There are two,
could you please double check if is not contained in the resulting
device tree?
dtc -I dtb -O dts dts/dt.dtb
I just tested it on a rpi3b. and it works if i remove the alias.
So far as I know U-Boot doesn't work with the alias, since there is no
driver for the "usb424,2514" compatible string.
So it is actually correct behaviour of my patch. ethernet1 doesn't work
because there is no eth1addr. So I see three solutions:
(1) make the matching work
(2) remove the alias
(3) set eth1addr instead of ethaddr
Any news on this? Can I help somewhere? I'd go with (2).
-michael
