[PATCH] cpu: imx8: use intended cpu-thermal device when getting temp value

[Anatolij Gustschin]

This fixes getting DT alert and critical pdata values in imx_scu_thermal
driver. On i.MX8QXP using not initialized alert pdata value resulted in
boot hang and endless loop outputting:
CPU Temperature (47200C) has beyond alert (0C), close to critical (0C) 
waiting...

While at it, preset CPU type values once to avoid multiple calls
of device_is_compatible() for same property.

Fixes: 3ee6ea443eb4 ("cpu: imx_cpu: Print the CPU temperature for iMX8QM A72")
Signed-off-by: Anatolij Gustschin <ag...@denx.de>
---
This one supersedes the older patch here:
 
http://patchwork.ozlabs.org/project/uboot/patch/20200516203420.24409-2-ag...@denx.de

 drivers/cpu/imx8_cpu.c | 50 +++++++++++++++++++++---------------------
 1 file changed, 25 insertions(+), 25 deletions(-)

diff --git a/drivers/cpu/imx8_cpu.c b/drivers/cpu/imx8_cpu.c
index 896e1ac776..adc4919d9e 100644
--- a/drivers/cpu/imx8_cpu.c
+++ b/drivers/cpu/imx8_cpu.c
@@ -18,6 +18,7 @@ struct cpu_imx_platdata {
        const char *name;
        const char *rev;
        const char *type;
+       u32 cpu_rsrc;
        u32 cpurev;
        u32 freq_mhz;
        u32 mpidr;
@@ -50,16 +51,23 @@ const char *get_imx8_rev(u32 rev)
        }
 }
 
-const char *get_core_name(struct udevice *dev)
+static void set_core_data(struct udevice *dev)
 {
-       if (device_is_compatible(dev, "arm,cortex-a35"))
-               return "A35";
-       else if (device_is_compatible(dev, "arm,cortex-a53"))
-               return "A53";
-       else if (device_is_compatible(dev, "arm,cortex-a72"))
-               return "A72";
-       else
-               return "?";
+       struct cpu_imx_platdata *plat = dev_get_platdata(dev);
+
+       if (device_is_compatible(dev, "arm,cortex-a35")) {
+               plat->cpu_rsrc = SC_R_A35;
+               plat->name = "A35";
+       } else if (device_is_compatible(dev, "arm,cortex-a53")) {
+               plat->cpu_rsrc = SC_R_A53;
+               plat->name = "A53";
+       } else if (device_is_compatible(dev, "arm,cortex-a72")) {
+               plat->cpu_rsrc = SC_R_A72;
+               plat->name = "A72";
+       } else {
+               plat->cpu_rsrc = SC_R_A53;
+               plat->name = "?";
+       }
 }
 
 #if IS_ENABLED(CONFIG_IMX_SCU_THERMAL)
@@ -67,12 +75,12 @@ static int cpu_imx_get_temp(struct cpu_imx_platdata *plat)
 {
        struct udevice *thermal_dev;
        int cpu_tmp, ret;
+       int idx = 1; /* use "cpu-thermal0" device */
 
-       if (!strcmp(plat->name, "A72"))
-               ret = uclass_get_device(UCLASS_THERMAL, 1, &thermal_dev);
-       else
-               ret = uclass_get_device(UCLASS_THERMAL, 0, &thermal_dev);
+       if (plat->cpu_rsrc == SC_R_A72)
+               idx = 2; /* use "cpu-thermal1" device */
 
+       ret = uclass_get_device(UCLASS_THERMAL, idx, &thermal_dev);
        if (!ret) {
                ret = thermal_get_temp(thermal_dev, &cpu_tmp);
                if (ret)
@@ -180,19 +188,11 @@ static const struct udevice_id cpu_imx8_ids[] = {
 
 static ulong imx8_get_cpu_rate(struct udevice *dev)
 {
+       struct cpu_imx_platdata *plat = dev_get_platdata(dev);
        ulong rate;
-       int ret, type;
-
-       if (device_is_compatible(dev, "arm,cortex-a35"))
-               type = SC_R_A35;
-       else if (device_is_compatible(dev, "arm,cortex-a53"))
-               type = SC_R_A53;
-       else if (device_is_compatible(dev, "arm,cortex-a72"))
-               type = SC_R_A72;
-       else
-               return 0;
+       int ret;
 
-       ret = sc_pm_get_clock_rate(-1, type, SC_PM_CLK_CPU,
+       ret = sc_pm_get_clock_rate(-1, plat->cpu_rsrc, SC_PM_CLK_CPU,
                                   (sc_pm_clock_rate_t *)&rate);
        if (ret) {
                printf("Could not read CPU frequency: %d\n", ret);
@@ -207,9 +207,9 @@ static int imx8_cpu_probe(struct udevice *dev)
        struct cpu_imx_platdata *plat = dev_get_platdata(dev);
        u32 cpurev;
 
+       set_core_data(dev);
        cpurev = get_cpu_rev();
        plat->cpurev = cpurev;
-       plat->name = get_core_name(dev);
        plat->rev = get_imx8_rev(cpurev & 0xFFF);
        plat->type = get_imx8_type((cpurev & 0xFF000) >> 12);
        plat->freq_mhz = imx8_get_cpu_rate(dev) / 1000000;
-- 
2.17.1