A Soft Reset sequence will return the flash to Power-on-Reset (POR)
state. It consists of two commands: Soft Reset Enable and Soft Reset.
Find out if the sequence is supported from BFPT DWORD 16.
Signed-off-by: Pratyush Yadav <p.ya...@ti.com>
---
drivers/mtd/spi/spi-nor-core.c | 6 ++++++
include/linux/mtd/spi-nor.h | 1 +
2 files changed, 7 insertions(+)
diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c
index 88aa8268f9..03bf34a3c9 100644
--- a/drivers/mtd/spi/spi-nor-core.c
+++ b/drivers/mtd/spi/spi-nor-core.c
@@ -151,6 +151,8 @@ struct sfdp_header {
#define BFPT_DWORD15_QER_SR2_BIT1_NO_RD (0x4UL << 20)
#define BFPT_DWORD15_QER_SR2_BIT1 (0x5UL << 20) /* Spansion */
+#define BFPT_DWORD16_SOFT_RST BIT(12)
+
#define BFPT_DWORD18_CMD_EXT_MASK GENMASK(30, 29)
#define BFPT_DWORD18_CMD_EXT_REP (0x0UL << 29) /* Repeat */
#define BFPT_DWORD18_CMD_EXT_INV (0x1UL << 29) /* Invert */
@@ -2073,6 +2075,10 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
break;
}
+ /* Soft Reset support. */
+ if (bfpt.dwords[BFPT_DWORD(16)] & BFPT_DWORD16_SOFT_RST)
+ nor->flags |= SNOR_F_SOFT_RESET;
+
/* Stop here if JESD216 rev B. */
if (bfpt_header->length == BFPT_DWORD_MAX_JESD216B)
return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt,
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index dbd29d0200..0850f1d775 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -248,6 +248,7 @@ enum spi_nor_option_flags {
SNOR_F_READY_XSR_RDY = BIT(4),
SNOR_F_USE_CLSR = BIT(5),
SNOR_F_BROKEN_RESET = BIT(6),
+ SNOR_F_SOFT_RESET = BIT(7),
};
struct spi_nor;
--
2.26.2
