On Fri, 22 May 2020 at 11:16, Walter Lozano <walter.loz...@collabora.com> wrote: > > As documentation is being moved to doc/boards/rockchip create a warning > message and remove the redundant list of supported boards. > > Signed-off-by: Walter Lozano <walter.loz...@collabora.com> > --- > doc/README.rockchip | 72 +++------------------------------------------ > 1 file changed, 4 insertions(+), 68 deletions(-) >
How about we simply remove this file and move all its content to doc/boards/rockchip? I'd say it can be all done in one go. Thanks, Eze > diff --git a/doc/README.rockchip b/doc/README.rockchip > index 70c8798ed2..154166ec78 100644 > --- a/doc/README.rockchip > +++ b/doc/README.rockchip > @@ -8,6 +8,10 @@ U-Boot on Rockchip > > A wide range of Rockchip SoCs are supported in mainline U-Boot > > +Warning > +======= > +This document is being moved to doc/board/rockchip, so information on it > +might be incomplete or outdated. > > Prerequisites > ============= > @@ -24,77 +28,9 @@ You will need: > - Suitable ARM cross compiler, e.g.: > sudo apt-get install gcc-4.7-arm-linux-gnueabi > > - > Building > ======== > > -At present 11 RK3288 boards are supported: > - > - - EVB RK3288 - use evb-rk3288 configuration > - - Firefly RK3288 - use firefly-rk3288 configuration > - - Hisense Chromebook - use chromebook_jerry configuration > - - Asus C100P Chromebook - use chromebook_minnie configuration > - - Asus Chromebit - use chromebook_mickey configuration > - - MiQi RK3288 - use miqi-rk3288 configuration > - - phyCORE-RK3288 RDK - use phycore-rk3288 configuration > - - PopMetal RK3288 - use popmetal-rk3288 configuration > - - Radxa Rock 2 - use rock2 configuration > - - Tinker RK3288 - use tinker-rk3288 configuration > - - Vyasa RK3288 - use vyasa-rk3288 configuration > - > -Two RK3036 boards are supported: > - > - - EVB RK3036 - use evb-rk3036 configuration > - - Kylin - use kylin_rk3036 configuration > - > -Two RK3308 boards are supported: > - > - - EVB RK3308 - use evb-rk3308 configuration > - - ROC-CC-RK3308 - use roc-cc-rk3308 configuration > - > -Three RK3328 boards are supported: > - > - - EVB RK3328 - use evb-rk3328_defconfig > - - Pine64 Rock64 board - use rock64-rk3328_defconfig > - - Firefly / Libre Computer Project ROC-RK3328-CC board - > - use roc-cc-rk3328_defconfig > - > -Size RK3399 boards are supported (aarch64): > - > - - EBV RK3399 - use evb_rk3399 configuration > - - Firefly RK3399 - use the firefly_rk3399 configuration > - - Puma - use puma_rk3399 configuration > - - Ficus - use ficus-rk3399 configuration > - - Rock960 (Vamrs) - use rock960-rk3399 configuration > - - Bob - use chromebook_bob configuration > - > -Four RK3368 boards are supported: > - > - - Sheep - use sheep-rk3368 configuration > - - Lion - use lion-rk3368 configuration > - - Geekbox - use geekbox configuration > - - EVB PX5 - use evb-px5 configuration > - > -One RK3128 board is supported: > - > - - EVB RK3128 - use evb-rk3128 configuration > - > -One RK3229 board is supported: > - > - - EVB RK3229 - use evb-rk3229 configuration > - > -Two RV1108 boards are supported: > - > - - EVB RV1108 - use evb-rv1108 configuration > - - Elgin R1 - use elgin-rv1108 configuration > - > -One RV3188 baord is supported: > - > - - Raxda Rock - use rock configuration > - > - > -For example: > - > 1. To build RK3288 board: > > CROSS_COMPILE=arm-linux-gnueabi- make O=firefly firefly-rk3288_defconfig > all > -- > 2.20.1 >