On Mon, May 25, 2020 at 2:57 PM Marcin Juszkiewicz <mar...@juszkiewicz.com.pl> wrote: > > W dniu 25.05.2020 o 11:24, Jagan Teki pisze: > > On Mon, May 25, 2020 at 2:36 PM Marcin Juszkiewicz > > <mar...@juszkiewicz.com.pl> wrote: > >> > >> W dniu 13.05.2020 o 09:13, frank.wang at rock-chips.com (Frank Wang) pisze: > >>> This series add quirks for DWC3 and add Rockchip RK3399 USB3.0 host > >>> support. > >>> > >>> The function has been tested pass on rk3399-evb and roc-rk3399-pc board. > >>> > >>> For V5 update: > >>> - Fix dwc3-generic driver followed Marek's comments for [PATCH v4 12/16]. > >>> - Add 'Reviewed-by' and 'Tested-by' tag for [PATCH v4 07/16] and [PATCH > >>> v4 08/16]. > >> > >> I imported patchset and started it on RockPro64. Enabled same config > >> options as on evb-rk3399. DeviceTree entries were already setup. > >> > >> Pendrive in USB3 (type A) port gets recognized as SuperSpeed one (was > >> HighSpeed before). Type C port is not working - nevermind is it empty, > >> with usb-c pendrive plugged or with usb-c to usb-a/c/hdmi dongle with > >> usb-a pendrive. > > > > Does that mean usb-c pendrive is also detected? > > No - "scanning bus dwc3 for devices... cannot reset port 1!?" every time > and devices plugged into usb-c are ignored.
Can you check 'usb reset' after 'usb start'