On Sun, 24 May 2020 17:46:22 +0200 Soeren Moch sm...@web.de wrote: > On 23.05.20 01:24, Anatolij Gustschin wrote: > > Migration to DM_VIDEO driver is long overdue, configure it in > > board config files. To enable the display set stdout like: > > > > setenv stdout serial,vidconsole > > > > Signed-off-by: Anatolij Gustschin <ag...@denx.de> > > --- > > This is only build tested. > I tested this on top of v2020.07-rc2 and your patch > "video: extend stdout video console work-around for 'vga'" > > Works great. However, some comments below.
Thanks for testing! ... > > +CONFIG_SYS_MALLOC_F_LEN=0x4000 > This is not necessary. The default 0x2000 also works fine. Dropped in v2. ... > Since DM_VIDEO requires vidconsole as output device, please also add > > ---8<--- > diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h > index 8ab3fcfe3e..82165a9ffe 100644 > --- a/include/configs/tbs2910.h > +++ b/include/configs/tbs2910.h > @@ -92,11 +92,11 @@ > "fan=gpio set 92\0" \ > "set_con_serial=setenv stdout serial; " \ > "setenv stderr serial\0" \ > - "set_con_hdmi=setenv stdout serial,vga; " \ > - "setenv stderr serial,vga\0" \ > - "stderr=serial,vga\0" \ > + "set_con_hdmi=setenv stdout serial,vidconsole; " \ > + "setenv stderr serial,vidconsole\0" \ > + "stderr=serial,vidconsole\0" \ > "stdin=serial,usbkbd\0" \ > - "stdout=serial,vga\0" > + "stdout=serial,vidconsole\0" > > #define CONFIG_BOOTCOMMAND \ > "mmc rescan; " \ > ---8<--- > > to avoid warnings for users with default environment.(not sure if > whitespace is still correct in this snippet) Done in v2. > With this DM_VIDEO conversion the board comes very close to the size > limit. While it works with my toolchain, there might be problems with > others. So maybe not a good idea to merge this as fix immediately. Yes, with GCC 9.2 it didn't work any more. I've submitted some DM_VIDEO patches to disable more unused code to fix this. > Since this depends on your above mentioned patch, do you plan to merge > this via u-boot-video, or should this go as usual through the imx tree? I'll merge this via u-boot-video tree. v2 patch depends on a few more video patches which are under review/built-test currently. -- Anatolij