Add CAxxxx Ethernet support for the Cortina Access
Presidio Engineering Board
Signed-off-by: Alex Nemirovsky <alex.nemirov...@cortina-access.com>
---
Changes in v4:
- Remove NI ENEt Driver legacy mode support
Changes in v3: None
Changes in v2: None
arch/arm/dts/ca-presidio-engboard.dts | 7 +++++++
configs/cortina_presidio-asic-emmc_defconfig | 4 +++-
2 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/ca-presidio-engboard.dts
b/arch/arm/dts/ca-presidio-engboard.dts
index c03dacc..fff879d 100644
--- a/arch/arm/dts/ca-presidio-engboard.dts
+++ b/arch/arm/dts/ca-presidio-engboard.dts
@@ -66,4 +66,11 @@
spi-max-frequency = <108000000>;
};
};
+
+ eth: ethnet@0xf4300000 {
+ compatible = "eth_cortina";
+ reg = <0x0 0xf4320000 0x34>,
+ <0x0 0xf43290d8 0x04>,
+ <0x0 0xf4304000 0x04>;
+ };
};
diff --git a/configs/cortina_presidio-asic-emmc_defconfig
b/configs/cortina_presidio-asic-emmc_defconfig
index e10008a..360ebeb 100644
--- a/configs/cortina_presidio-asic-emmc_defconfig
+++ b/configs/cortina_presidio-asic-emmc_defconfig
@@ -21,12 +21,14 @@ CONFIG_CMD_EXT4=y
CONFIG_OF_CONTROL=y
CONFIG_OF_LIVE=y
CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard"
-# CONFIG_NET is not set
CONFIG_DM=y
CONFIG_CORTINA_GPIO=y
CONFIG_DM_MMC=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_CORTINA=y
+CONFIG_PHYLIB=y
+CONFIG_DM_ETH=y
+CONFIG_CORTINA_NI_ENET=y
CONFIG_DM_SERIAL=y
CONFIG_CORTINA_UART=y
CONFIG_WDT=y
--
2.7.4
