On 2020/6/4 下午6:09, Heiko Stuebner wrote:
From: Heiko Stuebner <heiko.stueb...@theobroma-systems.com>
The regulator enable-gpio uses opposite values for the declaration
vs. the enable_active_low property, breaking the regulator enablement.
Make the usbhost-supply work again by bringing them in sync again.
This mimics the upstream Linux change found on:
http://lore.kernel.org/r/20200604091239.424318-1-he...@sntech.de
Signed-off-by: Heiko Stuebner <heiko.stueb...@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.y...@rock-chips.com>
Thanks,
- Kever
---
arch/arm/dts/rk3399-puma.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
index 531520e771..72c06abd27 100644
--- a/arch/arm/dts/rk3399-puma.dtsi
+++ b/arch/arm/dts/rk3399-puma.dtsi
@@ -101,7 +101,7 @@
vcc5v0_host: vcc5v0-host-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
enable-active-low;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_host_en>;
