Hi Jagan, On 27/05/20 6:26 pm, Jagan Teki wrote: > DM, DM_SPI and other driver model migration deadlines > are expired for this board. > > Drop it. > > Cc: Lokesh Vutla <lokeshvu...@ti.com> > Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
Please hold this patch. I see patches in ML for converting to DM https://patchwork.ozlabs.org/project/uboot/list/?series=180809 Thanks and regards, Lokesh > --- > Changes for v2: > - none > > arch/arm/mach-omap2/omap4/Kconfig | 4 - > board/ti/panda/Kconfig | 12 -- > board/ti/panda/MAINTAINERS | 6 - > board/ti/panda/Makefile | 6 - > board/ti/panda/panda.c | 346 ------------------------------ > board/ti/panda/panda_mux_data.h | 86 -------- > configs/omap4_panda_defconfig | 42 ---- > include/configs/omap4_panda.h | 34 --- > 8 files changed, 536 deletions(-) > delete mode 100644 board/ti/panda/Kconfig > delete mode 100644 board/ti/panda/MAINTAINERS > delete mode 100644 board/ti/panda/Makefile > delete mode 100644 board/ti/panda/panda.c > delete mode 100644 board/ti/panda/panda_mux_data.h > delete mode 100644 configs/omap4_panda_defconfig > delete mode 100644 include/configs/omap4_panda.h > > diff --git a/arch/arm/mach-omap2/omap4/Kconfig > b/arch/arm/mach-omap2/omap4/Kconfig > index 899289b645..4cc360f38a 100644 > --- a/arch/arm/mach-omap2/omap4/Kconfig > +++ b/arch/arm/mach-omap2/omap4/Kconfig > @@ -4,9 +4,6 @@ choice > prompt "OMAP4 board select" > optional > > -config TARGET_OMAP4_PANDA > - bool "TI OMAP4 PandaBoard" > - > config TARGET_OMAP4_SDP4430 > bool "TI OMAP4 SDP4430" > > @@ -18,7 +15,6 @@ endchoice > config SYS_SOC > default "omap4" > > -source "board/ti/panda/Kconfig" > source "board/ti/sdp4430/Kconfig" > source "board/amazon/kc1/Kconfig" > > diff --git a/board/ti/panda/Kconfig b/board/ti/panda/Kconfig > deleted file mode 100644 > index 8f277b612a..0000000000 > --- a/board/ti/panda/Kconfig > +++ /dev/null > @@ -1,12 +0,0 @@ > -if TARGET_OMAP4_PANDA > - > -config SYS_BOARD > - default "panda" > - > -config SYS_VENDOR > - default "ti" > - > -config SYS_CONFIG_NAME > - default "omap4_panda" > - > -endif > diff --git a/board/ti/panda/MAINTAINERS b/board/ti/panda/MAINTAINERS > deleted file mode 100644 > index 2142368271..0000000000 > --- a/board/ti/panda/MAINTAINERS > +++ /dev/null > @@ -1,6 +0,0 @@ > -PANDA BOARD > -M: Lokesh Vutla <lokeshvu...@ti.com> > -S: Maintained > -F: board/ti/panda/ > -F: include/configs/omap4_panda.h > -F: configs/omap4_panda_defconfig > diff --git a/board/ti/panda/Makefile b/board/ti/panda/Makefile > deleted file mode 100644 > index dd2ff33afa..0000000000 > --- a/board/ti/panda/Makefile > +++ /dev/null > @@ -1,6 +0,0 @@ > -# SPDX-License-Identifier: GPL-2.0+ > -# > -# (C) Copyright 2000, 2001, 2002 > -# Wolfgang Denk, DENX Software Engineering, w...@denx.de. > - > -obj-y := panda.o > diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c > deleted file mode 100644 > index 9ebecfdbf5..0000000000 > --- a/board/ti/panda/panda.c > +++ /dev/null > @@ -1,346 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0+ > -/* > - * (C) Copyright 2010 > - * Texas Instruments Incorporated, <www.ti.com> > - * Steve Sakoman <st...@sakoman.com> > - */ > -#include <common.h> > -#include <init.h> > -#include <log.h> > -#include <net.h> > -#include <asm/mach-types.h> > -#include <asm/arch/sys_proto.h> > -#include <asm/arch/mmc_host_def.h> > -#include <asm/arch/clock.h> > -#include <asm/arch/gpio.h> > -#include <asm/gpio.h> > -#include <env.h> > -#include <twl6030.h> > - > -#include "panda_mux_data.h" > - > -#ifdef CONFIG_USB_EHCI_HCD > -#include <usb.h> > -#include <asm/arch/ehci.h> > -#include <asm/ehci-omap.h> > -#endif > - > -#define PANDA_ULPI_PHY_TYPE_GPIO 182 > -#define PANDA_BOARD_ID_1_GPIO 101 > -#define PANDA_ES_BOARD_ID_1_GPIO 48 > -#define PANDA_BOARD_ID_2_GPIO 171 > -#define PANDA_ES_BOARD_ID_3_GPIO 3 > -#define PANDA_ES_BOARD_ID_4_GPIO 2 > - > -DECLARE_GLOBAL_DATA_PTR; > - > -const struct omap_sysinfo sysinfo = { > - "Board: OMAP4 Panda\n" > -}; > - > -struct omap4_scrm_regs *const scrm = (struct omap4_scrm_regs *)0x4a30a000; > - > -/** > - * @brief board_init > - * > - * @return 0 > - */ > -int board_init(void) > -{ > - gpmc_init(); > - > - gd->bd->bi_arch_number = MACH_TYPE_OMAP4_PANDA; > - gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */ > - > - return 0; > -} > - > -int board_eth_init(bd_t *bis) > -{ > - return 0; > -} > - > -/* > -* Routine: get_board_revision > -* Description: Detect if we are running on a panda revision A1-A6, > -* or an ES panda board. This can be done by reading > -* the level of GPIOs and checking the processor revisions. > -* This should result in: > -* Panda 4430: > -* GPIO171, GPIO101, GPIO182: 0 1 1 => A1-A5 > -* GPIO171, GPIO101, GPIO182: 1 0 1 => A6 > -* Panda ES: > -* GPIO2, GPIO3, GPIO171, GPIO48, GPIO182: 0 0 0 1 1 => B1/B2 > -* GPIO2, GPIO3, GPIO171, GPIO48, GPIO182: 0 0 1 1 1 => B3 > -*/ > -int get_board_revision(void) > -{ > - int board_id0, board_id1, board_id2; > - int board_id3, board_id4; > - int board_id; > - > - int processor_rev = omap_revision(); > - > - /* Setup the mux for the common board ID pins (gpio 171 and 182) */ > - writew((IEN | M3), (*ctrl)->control_padconf_core_base + UNIPRO_TX0); > - writew((IEN | M3), (*ctrl)->control_padconf_core_base + FREF_CLK2_OUT); > - > - board_id0 = gpio_get_value(PANDA_ULPI_PHY_TYPE_GPIO); > - board_id2 = gpio_get_value(PANDA_BOARD_ID_2_GPIO); > - > - if ((processor_rev >= OMAP4460_ES1_0 && > - processor_rev <= OMAP4460_ES1_1)) { > - /* > - * Setup the mux for the ES specific board ID pins (gpio 101, > - * 2 and 3. > - */ > - writew((IEN | M3), (*ctrl)->control_padconf_core_base + > - GPMC_A24); > - writew((IEN | M3), (*ctrl)->control_padconf_core_base + > - UNIPRO_RY0); > - writew((IEN | M3), (*ctrl)->control_padconf_core_base + > - UNIPRO_RX1); > - > - board_id1 = gpio_get_value(PANDA_ES_BOARD_ID_1_GPIO); > - board_id3 = gpio_get_value(PANDA_ES_BOARD_ID_3_GPIO); > - board_id4 = gpio_get_value(PANDA_ES_BOARD_ID_4_GPIO); > - > -#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG > - env_set("board_name", "panda-es"); > -#endif > - board_id = ((board_id4 << 4) | (board_id3 << 3) | > - (board_id2 << 2) | (board_id1 << 1) | (board_id0)); > - } else { > - /* Setup the mux for the Ax specific board ID pins (gpio 101) */ > - writew((IEN | M3), (*ctrl)->control_padconf_core_base + > - FREF_CLK2_OUT); > - > - board_id1 = gpio_get_value(PANDA_BOARD_ID_1_GPIO); > - board_id = ((board_id2 << 2) | (board_id1 << 1) | (board_id0)); > - > -#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG > - if ((board_id >= 0x3) && (processor_rev == OMAP4430_ES2_3)) > - env_set("board_name", "panda-a4"); > -#endif > - } > - > - return board_id; > -} > - > -/** > - * is_panda_es_rev_b3() - Detect if we are running on rev B3 of panda board > ES > - * > - * > - * Detect if we are running on B3 version of ES panda board, > - * This can be done by reading the level of GPIO 171 and checking the > - * processor revisions. > - * GPIO171: 1 => Panda ES Rev B3 > - * > - * Return : return 1 if Panda ES Rev B3 , else return 0 > - */ > -u8 is_panda_es_rev_b3(void) > -{ > - int processor_rev = omap_revision(); > - int ret = 0; > - > - if ((processor_rev >= OMAP4460_ES1_0 && > - processor_rev <= OMAP4460_ES1_1)) { > - > - /* Setup the mux for the common board ID pins (gpio 171) */ > - writew((IEN | M3), > - (*ctrl)->control_padconf_core_base + UNIPRO_TX0); > - > - /* if processor_rev is panda ES and GPIO171 is 1,it is rev > b3 */ > - ret = gpio_get_value(PANDA_BOARD_ID_2_GPIO); > - } > - return ret; > -} > - > -#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS > -/* > - * emif_get_reg_dump() - emif_get_reg_dump strong function > - * > - * @emif_nr - emif base > - * @regs - reg dump of timing values > - * > - * Strong function to override emif_get_reg_dump weak function in > sdram_elpida.c > - */ > -void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs) > -{ > - u32 omap4_rev = omap_revision(); > - > - /* Same devices and geometry on both EMIFs */ > - if (omap4_rev == OMAP4430_ES1_0) > - *regs = &emif_regs_elpida_380_mhz_1cs; > - else if (omap4_rev == OMAP4430_ES2_0) > - *regs = &emif_regs_elpida_200_mhz_2cs; > - else if (omap4_rev == OMAP4430_ES2_3) > - *regs = &emif_regs_elpida_400_mhz_1cs; > - else if (omap4_rev < OMAP4470_ES1_0) { > - if(is_panda_es_rev_b3()) > - *regs = &emif_regs_elpida_400_mhz_1cs; > - else > - *regs = &emif_regs_elpida_400_mhz_2cs; > - } > - else > - *regs = &emif_regs_elpida_400_mhz_1cs; > -} > - > -void emif_get_dmm_regs(const struct dmm_lisa_map_regs > - **dmm_lisa_regs) > -{ > - u32 omap_rev = omap_revision(); > - > - if (omap_rev == OMAP4430_ES1_0) > - *dmm_lisa_regs = &lisa_map_2G_x_1_x_2; > - else if (omap_rev == OMAP4430_ES2_3) > - *dmm_lisa_regs = &lisa_map_2G_x_2_x_2; > - else if (omap_rev < OMAP4460_ES1_0) > - *dmm_lisa_regs = &lisa_map_2G_x_2_x_2; > - else > - *dmm_lisa_regs = &ma_lisa_map_2G_x_2_x_2; > -} > - > -#endif > - > -/** > - * @brief misc_init_r - Configure Panda board specific configurations > - * such as power configurations, ethernet initialization as phase2 of > - * boot sequence > - * > - * @return 0 > - */ > -int misc_init_r(void) > -{ > - int phy_type; > - u32 auxclk, altclksrc; > - > - /* EHCI is not supported on ES1.0 */ > - if (omap_revision() == OMAP4430_ES1_0) > - return 0; > - > - get_board_revision(); > - > - gpio_direction_input(PANDA_ULPI_PHY_TYPE_GPIO); > - phy_type = gpio_get_value(PANDA_ULPI_PHY_TYPE_GPIO); > - > - if (phy_type == 1) { > - /* ULPI PHY supplied by auxclk3 derived from sys_clk */ > - debug("ULPI PHY supplied by auxclk3\n"); > - > - auxclk = readl(&scrm->auxclk3); > - /* Select sys_clk */ > - auxclk &= ~AUXCLK_SRCSELECT_MASK; > - auxclk |= AUXCLK_SRCSELECT_SYS_CLK << AUXCLK_SRCSELECT_SHIFT; > - /* Set the divisor to 2 */ > - auxclk &= ~AUXCLK_CLKDIV_MASK; > - auxclk |= AUXCLK_CLKDIV_2 << AUXCLK_CLKDIV_SHIFT; > - /* Request auxilary clock #3 */ > - auxclk |= AUXCLK_ENABLE_MASK; > - > - writel(auxclk, &scrm->auxclk3); > - } else { > - /* ULPI PHY supplied by auxclk1 derived from PER dpll */ > - debug("ULPI PHY supplied by auxclk1\n"); > - > - auxclk = readl(&scrm->auxclk1); > - /* Select per DPLL */ > - auxclk &= ~AUXCLK_SRCSELECT_MASK; > - auxclk |= AUXCLK_SRCSELECT_PER_DPLL << AUXCLK_SRCSELECT_SHIFT; > - /* Set the divisor to 16 */ > - auxclk &= ~AUXCLK_CLKDIV_MASK; > - auxclk |= AUXCLK_CLKDIV_16 << AUXCLK_CLKDIV_SHIFT; > - /* Request auxilary clock #3 */ > - auxclk |= AUXCLK_ENABLE_MASK; > - > - writel(auxclk, &scrm->auxclk1); > - } > - > - altclksrc = readl(&scrm->altclksrc); > - > - /* Activate alternate system clock supplier */ > - altclksrc &= ~ALTCLKSRC_MODE_MASK; > - altclksrc |= ALTCLKSRC_MODE_ACTIVE; > - > - /* enable clocks */ > - altclksrc |= ALTCLKSRC_ENABLE_INT_MASK | ALTCLKSRC_ENABLE_EXT_MASK; > - > - writel(altclksrc, &scrm->altclksrc); > - > - omap_die_id_usbethaddr(); > - > - return 0; > -} > - > -void set_muxconf_regs(void) > -{ > - do_set_mux((*ctrl)->control_padconf_core_base, > - core_padconf_array_essential, > - sizeof(core_padconf_array_essential) / > - sizeof(struct pad_conf_entry)); > - > - do_set_mux((*ctrl)->control_padconf_wkup_base, > - wkup_padconf_array_essential, > - sizeof(wkup_padconf_array_essential) / > - sizeof(struct pad_conf_entry)); > - > - if (omap_revision() >= OMAP4460_ES1_0) > - do_set_mux((*ctrl)->control_padconf_wkup_base, > - wkup_padconf_array_essential_4460, > - sizeof(wkup_padconf_array_essential_4460) / > - sizeof(struct pad_conf_entry)); > -} > - > -#if defined(CONFIG_MMC) > -int board_mmc_init(bd_t *bis) > -{ > - return omap_mmc_init(0, 0, 0, -1, -1); > -} > - > -#if !defined(CONFIG_SPL_BUILD) > -void board_mmc_power_init(void) > -{ > - twl6030_power_mmc_init(0); > -} > -#endif > -#endif > - > -#ifdef CONFIG_USB_EHCI_HCD > - > -static struct omap_usbhs_board_data usbhs_bdata = { > - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, > - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, > - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, > -}; > - > -int ehci_hcd_init(int index, enum usb_init_type init, > - struct ehci_hccr **hccr, struct ehci_hcor **hcor) > -{ > - int ret; > - unsigned int utmi_clk; > - > - /* Now we can enable our port clocks */ > - utmi_clk = readl((void *)CM_L3INIT_HSUSBHOST_CLKCTRL); > - utmi_clk |= HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK; > - setbits_le32((void *)CM_L3INIT_HSUSBHOST_CLKCTRL, utmi_clk); > - > - ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor); > - if (ret < 0) > - return ret; > - > - return 0; > -} > - > -int ehci_hcd_stop(int index) > -{ > - return omap_ehci_hcd_stop(); > -} > -#endif > - > -/* > - * get_board_rev() - get board revision > - */ > -u32 get_board_rev(void) > -{ > - return 0x20; > -} > diff --git a/board/ti/panda/panda_mux_data.h b/board/ti/panda/panda_mux_data.h > deleted file mode 100644 > index ad9e36525b..0000000000 > --- a/board/ti/panda/panda_mux_data.h > +++ /dev/null > @@ -1,86 +0,0 @@ > -/* SPDX-License-Identifier: GPL-2.0+ */ > -/* > - * (C) Copyright 2010 > - * Texas Instruments Incorporated, <www.ti.com> > - * > - * Balaji Krishnamoorthy <balaj...@ti.com> > - * Aneesh V <ane...@ti.com> > - */ > -#ifndef _PANDA_MUX_DATA_H_ > -#define _PANDA_MUX_DATA_H_ > - > -#include <asm/arch/mux_omap4.h> > - > - > -const struct pad_conf_entry core_padconf_array_essential[] = { > - > -{GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */ > -{GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */ > -{GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */ > -{GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */ > -{GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */ > -{GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */ > -{GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */ > -{GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */ > -{GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)}, /* sdmmc2_clk */ > -{GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */ > -{SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */ > -{SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */ > -{SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */ > -{SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */ > -{SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */ > -{SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */ > -{SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */ > -{SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */ > -{SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */ > -{SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */ > -{I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */ > -{I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */ > -{I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */ > -{I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */ > -{I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */ > -{I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */ > -{I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */ > -{I2C4_SDA, (PTU | IEN | M0)}, /* i2c4_sda */ > -{UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */ > -{UART3_RTS_SD, (M0)}, /* uart3_rts_sd > */ > -{UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */ > -{UART3_TX_IRTX, (M0)}, /* uart3_tx */ > -{USBB1_ULPITLL_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)},/* > usbb1_ulpiphy_clk */ > -{USBB1_ULPITLL_STP, (OFF_EN | OFF_OUT_PTD | M4)}, /* > usbb1_ulpiphy_stp */ > -{USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* > usbb1_ulpiphy_dir */ > -{USBB1_ULPITLL_NXT, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* > usbb1_ulpiphy_nxt */ > -{USBB1_ULPITLL_DAT0, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* > usbb1_ulpiphy_dat0 */ > -{USBB1_ULPITLL_DAT1, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* > usbb1_ulpiphy_dat1 */ > -{USBB1_ULPITLL_DAT2, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* > usbb1_ulpiphy_dat2 */ > -{USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* > usbb1_ulpiphy_dat3 */ > -{USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* > usbb1_ulpiphy_dat4 */ > -{USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* > usbb1_ulpiphy_dat5 */ > -{USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* > usbb1_ulpiphy_dat6 */ > -{USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* > usbb1_ulpiphy_dat7 */ > -{USBB1_HSIC_DATA, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* > usbb1_hsic_data */ > -{USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* > usbb1_hsic_strobe */ > -{USBC1_ICUSB_DP, (IEN | M0)}, /* > usbc1_icusb_dp */ > -{USBC1_ICUSB_DM, (IEN | M0)}, /* > usbc1_icusb_dm */ > -{UNIPRO_TY2, (PTU | IEN | M3)}, /* > gpio_1 */ > -{GPMC_WAIT1, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_62 */ > -{FREF_CLK2_OUT, (PTU | IEN | M3)}, /* gpio_182 */ > - > -}; > - > -const struct pad_conf_entry wkup_padconf_array_essential[] = { > - > -{PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */ > -{PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */ > -{PAD1_SYS_32K, (IEN | M0)}, /* sys_32k */ > -{PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */ > - > -}; > - > -const struct pad_conf_entry wkup_padconf_array_essential_4460[] = { > - > -{PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7 for TPS: Mode 3 */ > - > -}; > - > -#endif /* _PANDA_MUX_DATA_H_ */ > diff --git a/configs/omap4_panda_defconfig b/configs/omap4_panda_defconfig > deleted file mode 100644 > index 3ac6319d2d..0000000000 > --- a/configs/omap4_panda_defconfig > +++ /dev/null > @@ -1,42 +0,0 @@ > -CONFIG_ARM=y > -CONFIG_ARCH_OMAP2PLUS=y > -CONFIG_OMAP44XX=y > -CONFIG_TARGET_OMAP4_PANDA=y > -CONFIG_SPL=y > -CONFIG_SPL_TEXT_BASE=0x40300000 > -CONFIG_DISTRO_DEFAULTS=y > -CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; > run findfdt; run init_console; run envboot; run distro_bootcmd" > -CONFIG_SYS_CONSOLE_IS_IN_ENV=y > -CONFIG_SYS_CONSOLE_INFO_QUIET=y > -CONFIG_VERSION_VARIABLE=y > -# CONFIG_SPL_FS_EXT4 is not set > -# CONFIG_SPL_I2C_SUPPORT is not set > -# CONFIG_SPL_NAND_SUPPORT is not set > -CONFIG_SPL_OS_BOOT=y > -CONFIG_CMD_SPL=y > -CONFIG_CMD_ASKENV=y > -CONFIG_CMD_GPIO=y > -CONFIG_CMD_I2C=y > -CONFIG_CMD_MMC=y > -CONFIG_CMD_SPI=y > -CONFIG_CMD_USB=y > -# CONFIG_CMD_SETEXPR is not set > -# CONFIG_CMD_NFS is not set > -CONFIG_CMD_EXT4_WRITE=y > -CONFIG_ENV_IS_IN_FAT=y > -CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" > -CONFIG_SYS_RELOC_GD_ENV_ADDR=y > -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y > -CONFIG_MMC_OMAP_HS=y > -CONFIG_CONS_INDEX=3 > -CONFIG_SYS_NS16550=y > -CONFIG_SPI=y > -CONFIG_OMAP3_SPI=y > -CONFIG_USB=y > -CONFIG_USB_EHCI_HCD=y > -CONFIG_USB_MUSB_UDC=y > -CONFIG_USB_OMAP3=y > -CONFIG_USB_GADGET=y > -CONFIG_USB_HOST_ETHER=y > -CONFIG_USB_ETHER_SMSC95XX=y > -CONFIG_OF_LIBFDT=y > diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h > deleted file mode 100644 > index 835b7c299e..0000000000 > --- a/include/configs/omap4_panda.h > +++ /dev/null > @@ -1,34 +0,0 @@ > -/* SPDX-License-Identifier: GPL-2.0+ */ > -/* > - * (C) Copyright 2010 > - * Texas Instruments Incorporated. > - * Steve Sakoman <st...@sakoman.com> > - * > - * Configuration settings for the TI OMAP4 Panda board. > - * See ti_omap4_common.h for OMAP4 common part > - */ > - > -#ifndef __CONFIG_PANDA_H > -#define __CONFIG_PANDA_H > - > -/* > - * High Level Configuration Options > - */ > - > -/* USB UHH support options */ > -#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 1 > -#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 62 > - > -/* USB Networking options */ > - > -#define CONFIG_UBOOT_ENABLE_PADS_ALL > - > -#include <configs/ti_omap4_common.h> > - > -/* GPIO */ > - > -/* ENV related config options */ > - > -#define CONFIG_ENV_OVERWRITE > - > -#endif /* __CONFIG_PANDA_H */ >