On Wed, Jun 10, 2020 at 10:11 PM Stuart Yoder <b08...@gmail.com> wrote: > > Hi Sylwester, > > I am trying to test v4 of your patch series for USB support on rpi4: > https://patchwork.ozlabs.org/project/uboot/list/?series=179078 > > I am building u-boot 64-bit. Testing on a rpi4 B 1.2 board. But, USB is > not working for me and wanted to see if you had any ideas. Are there > other dependencies other than just applying your patch series? > > I've pasted the u-boot console output below. > > From what I can tell this board does not need the VL805 firmware
1.2 rev boards do need the firmware loading patch series, not sure about any other patches. > loading patch. But, I did try those patches and it did not make any > difference. > > Thanks, > Stuart > > --------------------------------------------------------------------- > > U-Boot 2020.07-rc1-00009-geca0ff12a6 (Jun 10 2020 - 16:02:20 -0500) > > DRAM: 3.9 GiB > RPI 4 Model B (0xc03112) > MMC: emmc2@7e340000: 0, mmcnr@7e300000: 1 > Loading Environment from FAT... *** Warning - bad CRC, using default > environment > > In: serial > Out: vidconsole > Err: vidconsole > Net: eth0: genet@7d580000 > starting USB... > No working controllers found > Hit any key to stop autoboot: 0