[PATCH v4] mmc: sdhci: Fix HISPD bit handling

[Jagan Teki]

SDHCI HISPD bits need to be configured based on desired mmc
timings mode and some HISPD quirks.

So, handle the HISPD bit based on the mmc computed selected
mode(timing parameter) rather than fixed mmc card clock
frequency.

Linux handle the HISPD similar like this in below commit but no
SDHCI_QUIRK_BROKEN_HISPD_MODE,

commit <501639bf2173> ("mmc: sdhci: fix SDHCI_QUIRK_NO_HISPD_BIT handling")

This eventually fixed the mmc write issue observed in
rk3399 sdhci controller.

Bug log for refernece,
=> gpt write mmc 0 $partitions
Writing GPT: mmc write failed
** Can't write to device 0 **
** Can't write to device 0 **
error!

Cc: Kever Yang <kever.y...@rock-chips.com>
Cc: Peng Fan <peng....@nxp.com>
Tested-by: Suniel Mahesh <su...@amarulasolutions.com> # roc-rk3399-pc
Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
---
Changes for v4:
- update commit message
- simplify the logic.

 drivers/mmc/sdhci.c | 23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)

diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 92cc8434af..6cb702111b 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -567,6 +567,7 @@ static int sdhci_set_ios(struct mmc *mmc)
 #endif
        u32 ctrl;
        struct sdhci_host *host = mmc->priv;
+       bool no_hispd_bit = false;
 
        if (host->ops && host->ops->set_control_reg)
                host->ops->set_control_reg(host);
@@ -594,14 +595,24 @@ static int sdhci_set_ios(struct mmc *mmc)
                        ctrl &= ~SDHCI_CTRL_4BITBUS;
        }
 
-       if (mmc->clock > 26000000)
-               ctrl |= SDHCI_CTRL_HISPD;
-       else
-               ctrl &= ~SDHCI_CTRL_HISPD;
-
        if ((host->quirks & SDHCI_QUIRK_NO_HISPD_BIT) ||
            (host->quirks & SDHCI_QUIRK_BROKEN_HISPD_MODE))
-               ctrl &= ~SDHCI_CTRL_HISPD;
+               no_hispd_bit = true;
+
+       if (!no_hispd_bit) {
+               if (mmc->selected_mode == MMC_HS ||
+                   mmc->selected_mode == SD_HS ||
+                   mmc->selected_mode == MMC_DDR_52 ||
+                   mmc->selected_mode == MMC_HS_200 ||
+                   mmc->selected_mode == MMC_HS_400 ||
+                   mmc->selected_mode == UHS_SDR25 ||
+                   mmc->selected_mode == UHS_SDR50 ||
+                   mmc->selected_mode == UHS_SDR104 ||
+                   mmc->selected_mode == UHS_DDR50)
+                       ctrl |= SDHCI_CTRL_HISPD;
+               else
+                       ctrl &= ~SDHCI_CTRL_HISPD;
+       }
 
        sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
 
-- 
2.25.1