Reinhard Meyer schrieb: > This patch adds SD/MMC support to AT91SAM9260/9XE/9G20 > using the generic MMC framework. > > Signed-off-by: Reinhard Meyer <u-b...@emk-elektronik.de> > --- > The driver itself is not dependent on any particular AT91 or AVR32 > device, but further work in device specific files is > required to enable its use for other AT91 (and AVR32) devices: > at91<*>_devices.c, hardware.h, at91<*>.h. > Patches welcome! > > arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 21 ++ > arch/arm/include/asm/arch-at91/at91_common.h | 1 + > arch/arm/include/asm/arch-at91/clk.h | 5 + > arch/arm/include/asm/arch-at91/hardware.h | 1 + > doc/README.atmel_mci | 86 +++++ > drivers/mmc/Makefile | 5 +- > drivers/mmc/atmel_mci.h | 48 +++- > drivers/mmc/gen_atmel_mci.c | 353 > +++++++++++++++++++++ > include/mmc.h | 15 +- > 9 files changed, 530 insertions(+), 5 deletions(-) Applied to u-boot-atmel/next Thanks, Reinhard
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot