Hi Simon,
On 23/6/20 09:28, Simon Glass wrote:
On Fri, 19 Jun 2020 at 08:56, Walter Lozano <walter.loz...@collabora.com> wrote:
Several MMC drivers use GPIO for card detection with cd-gpios property in
the MMC node pointing to a GPIO node. However, as U-Boot tries to save
space by keeping only required nodes using u-boot* properties, several
devices tree result in having only in the MMC node but not the GPIO node
associated to cd-gpios.
This patch, fixes several ocurrence of this issue.
Signed-off-by: Walter Lozano <walter.loz...@collabora.com>
---
arch/arm/dts/da850-evm-u-boot.dtsi | 4 ++++
arch/arm/dts/da850-lcdk-u-boot.dtsi | 4 ++++
arch/arm/dts/rk3288-u-boot.dtsi | 4 ++++
arch/arm/dts/rk3288-veyron-speedy-u-boot.dtsi | 2 +-
arch/arm/dts/rk3288-veyron-u-boot.dtsi | 11 +++++++++++
5 files changed, 24 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/rk3288-veyron-u-boot.dtsi
This patch did not go out to maintainers. If you are using patman, it
should do this automatically.
Reviewed-by: Simon Glass <s...@chromium.org>
Thanks again. It is a good point to start using patman, I will do.
Regards,
Walter