Dear Dennis Kerrisk, In message <e1318e0a083bfb4497f69194d590cd8c586ee...@mandi.psaudio.com> you wrote: > > I have a problem that I am trying to solve with U-boot. Wha > t I have is a Ubicom processor with 128 MB of ram, and USB. What I need to > do is load a 12 MB file into ram, and then program the flash with it. This
Please restrict your line length to some 70 characters or so. > version of u-boot was supplied by Ubicom for their chip. Every time I try t > o load the file into ram from a FAT formatted USB drive, no matter what the > starting address, u-boot crashes. > What I need to know is this even possible? Has anyone else had this problem > ? Should I attempt to try the latest version of u-boot? Ubicom has been no > help at all. Of course it is possible that U-Boot crashes, for example when there are hardware problems, or when there are bugs in the port to your board, or eventually even if you are running into a bug in common code. If your board is supported in mainline, then running the latest version is strongly recommended. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Most legends have their basis in facts. -- Kirk, "And The Children Shall Lead", stardate 5029.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot