Hi,
I've run into a situation with a new design and I could use some pointers.
Our hardware designers have built prototypes with different flash
configurations. One possible configuration is a dual die 2x32MB the
other is a single die 1x64MB.
My u-boot config is currently setup for the 2x32MB case i.e.
CONFIG_SYS_MAX_FLASH_BANKS = 2, CONFIG_SYS_FLASH_BANKS_LIST = {base,
base+32MB}. The problem with this is that when flash_get_size is called
on the 1x64 chip it discovers the same chip the 2nd time around and
promptly walks off the end of the memory area I have allocated for it.
Is there any existing way to make the cfi_flash driver handle this
situation for me?
Thanks,
Chris Packham
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
