Please ignore this series. I missed "PATCH" string. I will resend the correct patch set. --Marri
> -----Original Message----- > From: tma...@apm.com [mailto:tma...@apm.com] > Sent: Tuesday, September 07, 2010 5:19 PM > To: u-boot@lists.denx.de > Cc: s...@denx.de; Tirumala Marri > Subject: [v3 0/2] Add support for new SoC APM82XXX > > From: Tirumala Marri <tma...@apm.com> > > APM8XXXX is Applied Micro Circuits Corporations naming > convention for new line of SoCs. > > V1: > * Squash some of the patches. > * add space between "||" and "\". > * Add spaces around operators. > * Unsigned int to u32. > * Add empty line which was removed. > * remove warning "unused variable" in cpu_init.c > * Remove "All rights reserved" phrase from headers. > * Add empty line which was removed. > * Move EBC definititions to bluestone_config.h file > * Remove reconfigure_EBC() function. > * Remove unused CONFIG_SDRAM16BIT_OFFSET. > * Remove unused CONFIG_SDRAM_INFO_EEPROM_ADDR. > * Add empty lines in bluestone.c file. > * Replacing AC_R | AC_W | AC_X with AC_RWX. > * Remove changes to main Makefile > * Remove NAND references from config file. > * Squash some of the patches. > * Remove top Makefile change. > > V2: > * Missing space before "<". > * SDR_AHB_CFG not used, remove. > * boot device dfinitions are board specific ? removed. > * APM82161_MASK not used, remove > * set_mcsr() is already called in ddr init, no need to call here. > * removed finding bootdevice function which is not used. > * Add spaces in tlbentry() function. > * Board early init function is empty remove. > * Remove CONFIG_SYS_EXTSRAM_BASE. > * Set CONFIG_SYS_FLASH_SIZE to 4MB > * Remove CONFIG_SIZE_REDUCE & CONFIG_SECTOR_REDUCE. > * Spaces around " >> " . > * Correct the phy name CONFIG_M88E1111_PHY to CONFIG_RTL8211CL_PHY. > * Removed Defines added to 405ex. > > V3: > * Missing TLB entry for CONFIG_SYS_BOOT_BASE_ADDR. > * Correct multiline comment. > * Move CONFIG_SYS_EBC_PB0AP etc to EBC area in the config file. > * remove unused CONFIG_RTL8211CL_PHY. > * Replace hard coded valued for CONFIG_SYS_EBC_CFG with > macro definitions. > * board.cfg add the entry in sorted. > * use puts() if there is no formating needed. > * Change APM82XXX to APM821XX > * Modify the way cpu id is printed. > * Correct inadvertent change. > * Sort define list. > * Remove comment for get_sys_info(). > * Define a symbolic constat ISRAM1_OCM_SIZE. > * Create apm821xx.h instead of using ppc440.h > > Tirumala Marri (2): > APM821xx: Add CPU support > APM821xx: Add bluestone board support > > MAINTAINERS | 3 + > MAKEALL | 1 + > arch/powerpc/cpu/ppc4xx/cpu.c | 36 ++- > arch/powerpc/cpu/ppc4xx/cpu_init.c | 5 +- > arch/powerpc/cpu/ppc4xx/speed.c | 76 +++++- > arch/powerpc/cpu/ppc4xx/start.S | 11 +- > arch/powerpc/cpu/ppc4xx/tlb.c | 2 + > arch/powerpc/include/asm/ppc4xx-ebc.h | 4 + > arch/powerpc/include/asm/ppc4xx-isram.h | 14 +- > arch/powerpc/include/asm/ppc4xx-sdram.h | 12 +- > arch/powerpc/include/asm/ppc4xx-uic.h | 5 +- > arch/powerpc/include/asm/processor.h | 1 + > board/amcc/bluestone/Makefile | 52 ++++ > board/amcc/bluestone/bluestone.c | 111 +++++++ > board/amcc/bluestone/config.mk | 40 +++ > board/amcc/bluestone/init.S | 59 ++++ > boards.cfg | 1 + > include/apm821xx.h | 493 > +++++++++++++++++++++++++++++++ > include/configs/bluestone.h | 175 +++++++++++ > include/ppc4xx.h | 11 +- > 20 files changed, 1087 insertions(+), 25 deletions(-) > create mode 100644 board/amcc/bluestone/Makefile > create mode 100644 board/amcc/bluestone/bluestone.c > create mode 100644 board/amcc/bluestone/config.mk > create mode 100644 board/amcc/bluestone/init.S > create mode 100644 include/apm821xx.h > create mode 100644 include/configs/bluestone.h _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
