Hi Johannes,
My problem was in U-boot relocation mechanism.
In our current environment we have not relocation (U-boot is already in DDR).
So, after relocation the DT was absent and SPI and flash driver are not loaded.
Thanks,
Yakov
-----Original Message-----
From: Johannes Krottmayer <krj...@gmail.com>
Sent: Monday, 6 July 2020 18:59
To: Yakov Shmulevich <yak...@ceragon.com>; u-boot@lists.denx.de
Cc: Lioz Nadler <li...@ceragon.com>
Subject: [!EXT!] Re: U-boot Designware SPI driver issue
Hi Yakov,
have you fixed the issue?
I'm not a real developer from the U-Boot project, but I had a similar issue on
a PINE64 Rock64 board. The error code -19 was a missing alias in the
Device-Tree files on my used board.
Fixed this issue with the correct alias. Maybe it's the same issue on your
board. After that I got the error code -2, but fixed it too (missing SPI
support in the clock driver from the SoC).
Kind regards,
Johannes K.
On 24.06.20 at 10:37, Yakov Shmulevich wrote:
> Hello,
>
> We develop the system that based on MIPS that includes Synopsys SPI with
> NACRONIX SPI flash connected to it.
> For U-boot we are using version 2019.04-rc4.
> I want to save environment on SPI flash. For this I enabled the DesignWare
> SPI driver and MACRONIX SPI flash driver in U-boot .config and add
> corresponding definitions in our dts file.
> Following the .config relevant lines:
>
> CONFIG_CMD_SAVEENV=y
>
> CONFIG_DM_SPI_FLASH=y
> CONFIG_SPI_FLASH=y
> CONFIG_SPI_FLASH_MACRONIX=y
>
> CONFIG_SPI=y
> CONFIG_DM_SPI=y
> CONFIG_SPI_MEM=y
> CONFIG_DESIGNWARE_SPI=y
>
> Following the dts file relevant lines:
>
> ahb {
> compatible = "simple-bus";
>
> spi0: spi-master@1FCD0000 {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "snps,dw-apb-ssi";
> reg = <0x1FCD0000 0x40>;
> num-chipselect = <4>;
> bus-num = <0>;
> reg-io-width = <4>;
> reg-shift = <2>;
> spi-max-frequency = <18000000>; /*
> input clock */
>
> status = "okay";
>
> spi-flash@0 {
> compatible =
> "spi-flash";
>
> spi-max-frequency = <18000000>; /* input clock */
> reg = <0>; /*
> CS0 */
> };
> };
> };
>
> In the U-boot startup I get the following error:
> Loading Environment from SPI Flash...
> Invalid bus 0 (err=-19)
> *** Warning - spi_flash_probe_bus_cs() failed, using default
> environment Also the "sf probe" command gives the similar error:
>
>
>
> # sf probe 0:0
>
> Invalid bus 0 (err=-19)
>
> Failed to initialize SPI flash at 0:0 (error -19) The error
> -19 is ENODEV error.
>
>
>
> After the problem evaluation I found that both "load environment" and "sf
> probe" failed in uclass_find_device_by_seq() function (drivers/core/uclass.c).
>
> This function failed to find device for uclass_id= UCLASS_SPI on bus 0
> (spi0). In main there are no devices on this bus.
>
>
>
> In both cases the flow is started from spi_flash_probe_bus_cs() function
> (drivers/mtd/spi/sf-uclass.c) for device "spi_flash@0:0".
>
> In the start of this flow uclass_get() function (drivers/core/uclass.c)) is
> executed to find UCLASS_SPI driver.
>
> This function returns uclass with driver "spi" and not "dw_spi" as I expected.
> Also I found that the DesignWare SPI driver probe (designware_spi.c) doesn't
> even executed.
>
> Can somebody point me on my problem?
> Or maybe there is some example of working Synopsis SPI with flash definitions
> in U-boot.
>
> Thanks,
> Yakov
>
> This email message and any attachments are intended solely for the use of the
> addressees hereof.
> This message and any attachments may contain information that is
> confidential, privileged and exempt from disclosure under applicable law.
> If you are not the intended recipient of this message, you are prohibited
> from reading, disclosing, reproducing, distributing, disseminating or
> otherwise using this transmission.
> If you have received this message in error, please promptly notify the sender
> at Ceragon by reply E-mail and immediately delete this message from your
> system.
>
This email message and any attachments are intended solely for the use of the
addressees hereof.
This message and any attachments may contain information that is confidential,
privileged and exempt from disclosure under applicable law.
If you are not the intended recipient of this message, you are prohibited from
reading, disclosing, reproducing, distributing, disseminating or otherwise
using this transmission.
If you have received this message in error, please promptly notify the sender
at Ceragon by reply E-mail and immediately delete this message from your system.
