>-----Original Message----- >From: U-Boot <u-boot-boun...@lists.denx.de> On Behalf Of Kuldeep Singh >Sent: Thursday, June 11, 2020 12:13 PM >To: u-boot@lists.denx.de >Cc: Priyanka Jain <priyanka.j...@nxp.com>; Kuldeep Singh ><kuldeep.si...@nxp.com> >Subject: [PATCH] configs: ls1043aqds: Configure QSPI related configs > >LS1043A-QDS has "s25fl128s" flash of size 16M with 64K sector size. >The board requires few spi-flash related configs to be updated in TFA and >QSPI _defconfigs. > >Following are the changes: >- Define/Update CONFIG_ENV_ADDR >- Unset CONFIG_SPI_FLASH_BAR >- Correct CONFIG_ENV_SECT_SIZE >- Enable CONFIG_SYS_RELOC_GD_ENV_ADDR > >Signed-off-by: Kuldeep Singh <kuldeep.si...@nxp.com> >--- > configs/ls1043aqds_qspi_defconfig | 1 + > configs/ls1043aqds_tfa_SECURE_BOOT_defconfig | 1 + > configs/ls1043aqds_tfa_defconfig | 3 ++- > 3 files changed, 4 insertions(+), 1 deletion(-) > >diff --git a/configs/ls1043aqds_qspi_defconfig >b/configs/ls1043aqds_qspi_defconfig >index a018b22..bb92b4c 100644 >--- a/configs/ls1043aqds_qspi_defconfig >+++ b/configs/ls1043aqds_qspi_defconfig >@@ -35,6 +35,7 @@ >CONFIG_MTDPARTS_DEFAULT="mtdparts=spi0.0:1m(uboot),5m(kernel),1m(d >tb),9m(file_sy > CONFIG_OF_CONTROL=y > CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart" > CONFIG_ENV_IS_IN_SPI_FLASH=y >+CONFIG_ENV_ADDR=0x40300000 > CONFIG_SYS_RELOC_GD_ENV_ADDR=y > CONFIG_DM=y > CONFIG_SATA_CEVA=y >diff --git a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig >b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig >index 3ee5d28..a9d7131 100644 >--- a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig >+++ b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig >@@ -48,6 +48,7 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_MTD_RAW_NAND=y >CONFIG_SPI_FLASH=y > CONFIG_SF_DEFAULT_BUS=1 >+# CONFIG_SPI_FLASH_BAR is not set > CONFIG_SPI_FLASH_SPANSION=y > CONFIG_PHYLIB=y > CONFIG_PHYLIB_10G=y >diff --git a/configs/ls1043aqds_tfa_defconfig >b/configs/ls1043aqds_tfa_defconfig >index 297788b..eb1f905 100644 >--- a/configs/ls1043aqds_tfa_defconfig >+++ b/configs/ls1043aqds_tfa_defconfig >@@ -4,7 +4,7 @@ CONFIG_TFABOOT=y > CONFIG_SYS_TEXT_BASE=0x82000000 > CONFIG_ENV_SIZE=0x2000 > CONFIG_ENV_OFFSET=0x500000 >-CONFIG_ENV_SECT_SIZE=0x20000 >+CONFIG_ENV_SECT_SIZE=0x10000 > CONFIG_DM_GPIO=y > CONFIG_NR_DRAM_BANKS=2 > CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y >@@ -43,6 +43,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y >CONFIG_USE_ENV_SPI_BUS=y > CONFIG_ENV_SPI_BUS=0 > CONFIG_ENV_ADDR=0x60500000 >+CONFIG_SYS_RELOC_GD_ENV_ADDR=y Please confirm that all boot-sources will work fine with this change.
Regards Priyanka <snip>