On Fri, Jul 10, 2020 at 07:07:37PM +0200, Stefan Bosch wrote: > Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: > - SPL not supported yet --> no spl-dir in arch/arm/cpu/armv7/s5p4418/. > Appropriate line in Makefile removed. > - cpu.c: '#include <cpu_func.h>' added. > - arch/arm/cpu/armv7/s5p4418/u-boot.lds removed, is not required > anylonger. > - "obj-$(CONFIG_ARCH_NEXELL) += s5p-common/" added to > arch/arm/cpu/armv7/Makefile since s5p-common/pwm.c is used instead > of drivers/pwm/pwm-nexell.c. > - s5p4418.dtsi: '#include "../../../include/generated/autoconf.h"' > removed, is not necessary, error at out-of-tree building. > '#ifdef CONFIG_CPU_NXP4330'-blocks (2x) removed. Some minor changes > regarding mmc. 'u-boot,dm-pre-reloc' added to dp0 because of added > DM_VIDEO support. > - board/s5p4418/ renamed to board/friendlyarm/ > - All s5p4418-boards except nanopi2 removed because there is no > possibility to test the other boards. > - Kconfig: Changes to have a structure like mach-bcm283x (RaspberryPi), > e.g. "config ..." entries moved from/to other Kconfig. > - "CONFIG_" removed from several s5p4418/nanopi2 specific defines > because the appropriate values do not need to be configurable. > - nanopi2/board.c: All getenv(), getenv_ulong(), setenv() and saveenv() > renamed to env_get(), env_get_ulong(), env_set() and env_save(), > respectively. MACH_TYPE_S5P4418 is not defined anymore, therefore > appropriate code removed (not necessary for DT-kernels). > - nanopi2/onewire.c: All crc8() renamed to crc8_ow() because crc8() is > already defined in lib/crc8.c (with different parameters). > - dts: "nexell,s5pxx18-i2c" used instead of "i2c-gpio", i2c0 and > i2c1 added. gmac-, ehci- and dwc2otg-entries removed because the > appropriate functionality is not supported yet. New mmc-property > "mmcboost" added. > s5p4418-pinctrl.dtsi: gmac-entries removed, mmc- and i2c-entries > added. > - '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where > possible (and similar). > > Signed-off-by: Stefan Bosch <stefa...@posteo.net>
Applied to u-boot/master, thanks! -- Tom
signature.asc
Description: PGP signature