This is another in series of patches which remove ad-hoc reset_cpu()
hacks from board files. This one is for iMX7, so implement default
reset_cpu() there to prevent it from showing up in board files.
Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Fabio Estevam <feste...@gmail.com>
Cc: NXP i.MX U-Boot Team <uboot-...@nxp.com>
Cc: Peng Fan <peng....@nxp.com>
Cc: Stefano Babic <sba...@denx.de>
---
arch/arm/mach-imx/mx7/soc.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/mach-imx/mx7/soc.c b/arch/arm/mach-imx/mx7/soc.c
index 9cb61f5c34..8db672fb05 100644
--- a/arch/arm/mach-imx/mx7/soc.c
+++ b/arch/arm/mach-imx/mx7/soc.c
@@ -18,6 +18,7 @@
#include <env.h>
#include <imx_thermal.h>
#include <fsl_sec.h>
+#include <fsl_wdog.h>
#include <asm/setup.h>
#include <linux/delay.h>
@@ -419,3 +420,15 @@ void reset_misc(void)
#endif
}
+#if !CONFIG_IS_ENABLED(SYSRESET)
+void reset_cpu(ulong addr)
+{
+ struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR;
+
+ /* Clear WDA to trigger WDOG_B immediately */
+ writew(SET_WCR_WT(1) | WCR_WDT | WCR_WDE | WCR_SRS, &wdog->wcr);
+
+ while (1)
+ ;
+}
+#endif
--
2.27.0
