Total Compute is based on ARM architecture and has
the following features enabled in u-boot:
- PL011 UART
- PL180 MMC
- NOR Flash
- FIT image with Signature
- AVB

Signed-off-by: Usama Arif <usama.a...@arm.com>
---
Changes for v2:
 - Added arch/arm/dts/total_compute.dts to 
board/armltd/total_compute/MAINTAINERS
 - Added bootm_size of 512 MB for total compute board. 

Changes for v3:
 - Removed fdt_high and initrd_high to allow relocation

 arch/arm/Kconfig                           | 11 +++
 arch/arm/dts/Makefile                      |  2 +
 arch/arm/dts/total_compute.dts             | 48 ++++++++++++
 arch/arm/include/asm/gpio.h                |  2 +-
 board/armltd/total_compute/Kconfig         | 12 +++
 board/armltd/total_compute/MAINTAINERS     |  7 ++
 board/armltd/total_compute/Makefile        |  6 ++
 board/armltd/total_compute/total_compute.c | 67 ++++++++++++++++
 configs/total_compute_defconfig            | 53 +++++++++++++
 include/configs/total_compute.h            | 89 ++++++++++++++++++++++
 10 files changed, 296 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/total_compute.dts
 create mode 100644 board/armltd/total_compute/Kconfig
 create mode 100644 board/armltd/total_compute/MAINTAINERS
 create mode 100644 board/armltd/total_compute/Makefile
 create mode 100644 board/armltd/total_compute/total_compute.c
 create mode 100644 configs/total_compute_defconfig
 create mode 100644 include/configs/total_compute.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6b8a32c38d..20ae4af9c2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1195,6 +1195,15 @@ config TARGET_VEXPRESS64_JUNO
        select USB
        select DM_USB
 
+config TARGET_TOTAL_COMPUTE
+       bool "Support Total Compute Platform"
+       select ARM64
+       select PL01X_SERIAL
+       select DM
+       select DM_SERIAL
+       select DM_MMC
+       select DM_GPIO
+
 config TARGET_LS2080A_EMU
        bool "Support ls2080a_emu"
        select ARCH_LS2080A
@@ -1893,6 +1902,8 @@ source "arch/arm/mach-imx/Kconfig"
 
 source "arch/arm/mach-nexell/Kconfig"
 
+source "board/armltd/total_compute/Kconfig"
+
 source "board/bosch/shc/Kconfig"
 source "board/bosch/guardian/Kconfig"
 source "board/CarMediaLab/flea3/Kconfig"
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 8ecf63e988..5fc0840c5a 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -978,6 +978,8 @@ dtb-$(CONFIG_TARGET_VEXPRESS_CA5X2) += vexpress-v2p-ca5s.dtb
 dtb-$(CONFIG_TARGET_VEXPRESS_CA9X4) += vexpress-v2p-ca9.dtb
 dtb-$(CONFIG_TARGET_VEXPRESS_CA15_TC2) += vexpress-v2p-ca15_a7.dtb
 
+dtb-$(CONFIG_TARGET_TOTAL_COMPUTE) += total_compute.dtb
+
 dtb-$(CONFIG_TARGET_DURIAN) += phytium-durian.dtb
 
 dtb-$(CONFIG_TARGET_PRESIDIO_ASIC) += ca-presidio-engboard.dtb
diff --git a/arch/arm/dts/total_compute.dts b/arch/arm/dts/total_compute.dts
new file mode 100644
index 0000000000..4399269a44
--- /dev/null
+++ b/arch/arm/dts/total_compute.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2020 Arm Limited
+ */
+
+/dts-v1/;
+
+/ {
+       model = "total_compute";
+       compatible = "arm,total_compute";
+       #address-cells = <2>;
+       #size-cells = <2>;
+
+       sysreg: sysreg@1c010000 {
+               compatible = "arm,vexpress-sysreg";
+               reg = <0x0 0x001c010000 0x0 0x1000>;
+               gpio-controller;
+               #gpio-cells = <2>;
+       };
+
+       fixed_3v3: v2m-3v3 {
+               compatible = "regulator-fixed";
+               regulator-name = "3V3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-always-on;
+       };
+
+       mmci@1c050000 {
+               compatible = "arm,pl180", "arm,primecell";
+               reg = <0x0 0x001c050000 0x0 0x1000>;
+               cd-gpios = <&sysreg 0 0>;
+               arm,primecell-periphid = <0x00880180>;
+               wp-gpios = <&sysreg 1 0>;
+               bus-width = <8>;
+               max-frequency = <12000000>;
+               vmmc-supply = <&fixed_3v3>;
+               clocks = <&clock24mhz>, <&clock24mhz>;
+               clock-names = "mclk", "apb_pclk";
+       };
+
+       clock24mhz: clock24mhz {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <24000000>;
+               clock-output-names = "bp:clock24mhz";
+       };
+};
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
index 7dc87afb83..6ecb876eda 100644
--- a/arch/arm/include/asm/gpio.h
+++ b/arch/arm/include/asm/gpio.h
@@ -3,7 +3,7 @@
        !defined(CONFIG_ARCH_BCM6858) && !defined(CONFIG_ARCH_BCM63158) && \
        !defined(CONFIG_ARCH_ROCKCHIP) && !defined(CONFIG_ARCH_ASPEED) && \
        !defined(CONFIG_ARCH_U8500) && !defined(CONFIG_CORTINA_PLATFORM) && \
-       !defined(CONFIG_TARGET_BCMNS3)
+       !defined(CONFIG_TARGET_BCMNS3) && !defined(CONFIG_TARGET_TOTAL_COMPUTE)
 #include <asm/arch/gpio.h>
 #endif
 #include <asm-generic/gpio.h>
diff --git a/board/armltd/total_compute/Kconfig 
b/board/armltd/total_compute/Kconfig
new file mode 100644
index 0000000000..62e6e6f4ac
--- /dev/null
+++ b/board/armltd/total_compute/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_TOTAL_COMPUTE
+
+config SYS_BOARD
+       default "total_compute"
+
+config SYS_VENDOR
+       default "armltd"
+
+config SYS_CONFIG_NAME
+       default "total_compute"
+
+endif
diff --git a/board/armltd/total_compute/MAINTAINERS 
b/board/armltd/total_compute/MAINTAINERS
new file mode 100644
index 0000000000..3dc1cd188a
--- /dev/null
+++ b/board/armltd/total_compute/MAINTAINERS
@@ -0,0 +1,7 @@
+TOTAL_COMPUTE BOARD
+M:     Usama Arif <usama.a...@arm.com>
+S:     Maintained
+F:     board/armltd/total_compute/
+F:     include/configs/total_compute.h
+F:     configs/total_compute_defconfig
+F:     arch/arm/dts/total_compute.dts
diff --git a/board/armltd/total_compute/Makefile 
b/board/armltd/total_compute/Makefile
new file mode 100644
index 0000000000..8b10458431
--- /dev/null
+++ b/board/armltd/total_compute/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2020 Arm Limited
+# Usama Arif <usama.a...@arm.com>
+
+obj-y  := total_compute.o
diff --git a/board/armltd/total_compute/total_compute.c 
b/board/armltd/total_compute/total_compute.c
new file mode 100644
index 0000000000..0be6435fe3
--- /dev/null
+++ b/board/armltd/total_compute/total_compute.c
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2020 Arm Limited
+ * Usama Arif <usama.a...@arm.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dm/platform_data/serial_pl01x.h>
+#include <asm/armv8/mmu.h>
+
+static const struct pl01x_serial_platdata serial_platdata = {
+       .base = UART0_BASE,
+       .type = TYPE_PL011,
+       .clock = CONFIG_PL011_CLOCK,
+};
+
+U_BOOT_DEVICE(total_compute_serials) = {
+       .name = "serial_pl01x",
+       .platdata = &serial_platdata,
+};
+
+static struct mm_region total_compute_mem_map[] = {
+       {
+               .virt = 0x0UL,
+               .phys = 0x0UL,
+               .size = 0x80000000UL,
+               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+                        PTE_BLOCK_NON_SHARE |
+                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
+       }, {
+               .virt = 0x80000000UL,
+               .phys = 0x80000000UL,
+               .size = 0xff80000000UL,
+               .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+                        PTE_BLOCK_INNER_SHARE
+       }, {
+               /* List terminator */
+               0,
+       }
+};
+
+struct mm_region *mem_map = total_compute_mem_map;
+
+int board_init(void)
+{
+       return 0;
+}
+
+int dram_init(void)
+{
+       gd->ram_size = PHYS_SDRAM_1_SIZE;
+       return 0;
+}
+
+int dram_init_banksize(void)
+{
+       gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+       gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+       return 0;
+}
+
+/* Nothing to be done here as handled by PSCI interface */
+void reset_cpu(ulong addr)
+{
+}
diff --git a/configs/total_compute_defconfig b/configs/total_compute_defconfig
new file mode 100644
index 0000000000..e36d701ff4
--- /dev/null
+++ b/configs/total_compute_defconfig
@@ -0,0 +1,53 @@
+CONFIG_ARM=y
+CONFIG_TARGET_TOTAL_COMPUTE=y
+CONFIG_SYS_TEXT_BASE=0xe0000000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_ENV_SIZE=0x2a00000
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_DEFAULT_DEVICE_TREE="total_compute"
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_ANDROID_BOOT_IMAGE=y
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_BOOTDELAY=5
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyAMA0 debug user_debug=31 earlycon=pl011,0x7ff80000 
loglevel=9 androidboot.hardware=total_compute video=640x480-32@60 
androidboot.boot_devices=1c050000.mmci ip=dhcp androidboot.selinux=permissive"
+# CONFIG_USE_BOOTCOMMAND is not set
+# CONFIG_DISPLAY_CPUINFO is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_AVB_VERIFY=y
+CONFIG_AVB_BUF_ADDR=0x90000000
+CONFIG_AVB_BUF_SIZE=0x10000000
+CONFIG_SYS_PROMPT="TOTAL_COMPUTE# "
+# CONFIG_CMD_CONSOLE is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EDITENV is not set
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0xff000000
+CONFIG_CMD_ARMFLASH=y
+CONFIG_CMD_GPT=y
+# CONFIG_RANDOM_UUID is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+# CONFIG_CMD_ITEST is not set
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+# CONFIG_CMD_MISC is not set
+CONFIG_CMD_AVB=y
+CONFIG_CMD_UBI=y
+# CONFIG_ISO_PARTITION is not set
+CONFIG_OF_CONTROL=y
+# CONFIG_NET is not set
+CONFIG_CLK=y
+# CONFIG_MMC_WRITE is not set
+CONFIG_ARM_PL180_MMCI=y
+CONFIG_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_SYS_FLASH_PROTECTION=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_LIBAVB=y
+CONFIG_OF_LIBFDT_OVERLAY=y
diff --git a/include/configs/total_compute.h b/include/configs/total_compute.h
new file mode 100644
index 0000000000..cc93f1930a
--- /dev/null
+++ b/include/configs/total_compute.h
@@ -0,0 +1,89 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration for Total Compute platform. Parts were derived from other ARM
+ * configurations.
+ * (C) Copyright 2020 Arm Limited
+ * Usama Arif <usama.a...@arm.com>
+ */
+
+#ifndef __TOTAL_COMPUTE_H
+#define __TOTAL_COMPUTE_H
+
+#define CONFIG_REMAKE_ELF
+
+/* Link Definitions */
+#define CONFIG_SYS_INIT_SP_ADDR        (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
+
+#define CONFIG_SYS_BOOTM_LEN   (64 << 20)
+
+#define UART0_BASE             0x7ff80000
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN  (CONFIG_ENV_SIZE + (8 << 20))
+
+/* PL011 Serial Configuration */
+#define CONFIG_PL011_CLOCK     7372800
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LOAD_ADDR   0x90000000
+
+/* Physical Memory Map */
+#define PHYS_SDRAM_1           0x80000000
+/* Top 48MB reserved for secure world use */
+#define DRAM_SEC_SIZE          0x03000000
+#define PHYS_SDRAM_1_SIZE      0x80000000 - DRAM_SEC_SIZE
+#define CONFIG_SYS_SDRAM_BASE  PHYS_SDRAM_1
+
+#define CONFIG_ARM_PL180_MMCI_BASE             0x001c050000
+#define CONFIG_SYS_MMC_MAX_BLK_COUNT           127
+#define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ       12000000
+
+#define CONFIG_EXTRA_ENV_SETTINGS      \
+                               "bootm_size=0x20000000\0"       \
+                               "load_addr=0xa0000000\0"        \
+                               "kernel_addr_r=0x80080000\0"    \
+                               "initrd_addr_r=0x88000000\0"    \
+                               "fdt_addr_r=0x83000000\0"
+/*
+ * If vbmeta partition is present, boot Android with verification using AVB.
+ * Else if system partition is present (no vbmeta partition), boot Android
+ * without verification (for development purposes).
+ * Else boot FIT image.
+ */
+#define CONFIG_BOOTCOMMAND     \
+                               "if part number mmc 0 vbmeta is_avb; then" \
+                               "  echo MMC with vbmeta partition detected.;" \
+                               "  echo starting Android Verified boot.;" \
+                               "  avb init 0; " \
+                               "  if avb verify; then " \
+                               "    set bootargs $bootargs $avb_bootargs; " \
+                               "    part start mmc 0 boot boot_start; " \
+                               "    part size mmc 0 boot boot_size; " \
+                               "    mmc read ${load_addr} ${boot_start} 
${boot_size}; " \
+                               "    bootm ${load_addr} ${load_addr} 
${fdt_addr_r}; " \
+                               "  else; " \
+                               "    echo AVB verification failed.; " \
+                               "    exit; " \
+                               "  fi; " \
+                               "elif part number mmc 0 system 
is_non_avb_android; then " \
+                               "  booti ${kernel_addr_r} ${initrd_addr_r} 
${fdt_addr_r};" \
+                               "else;" \
+                               "  echo Booting FIT image.;" \
+                               "  bootm ${load_addr} ${load_addr} 
${fdt_addr_r}; " \
+                               "fi;"
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
+#define CONFIG_SYS_MAXARGS             64      /* max command args */
+
+#define CONFIG_SYS_FLASH_BASE          0x0C000000
+/* 256 x 256KiB sectors */
+#define CONFIG_SYS_MAX_FLASH_SECT      256
+
+#define CONFIG_SYS_FLASH_CFI_WIDTH     FLASH_CFI_32BIT
+#define CONFIG_SYS_MAX_FLASH_BANKS     1
+
+#define CONFIG_SYS_FLASH_EMPTY_INFO    /* flinfo indicates empty blocks */
+#define FLASH_MAX_SECTOR_SIZE          0x00040000
+
+#endif /* __TOTAL_COMPUTE_H */
-- 
2.17.1

Reply via email to