On Thu, Sep 03, 2020 at 02:14:35PM +0200, Marek Vasut wrote: > Mostly DFU fixes and r8152 fixes below: > > The following changes since commit 23e333a5c083a000d0cabc53f7c0d261bae9e5ca: > > MAINTAINERS: step down as maintainer of UniPhier SoCs (2020-08-31 > 17:11:24 -0400) > > are available in the Git repository at: > > git://git.denx.de/u-boot-usb.git master > > for you to fetch changes up to 293a6dfeb96129abebf1ad927fa9aedf03a66d34: > > fastboot: getvar: fix partition-size return value (2020-09-01 14:47:43 > +0200) > > ---------------------------------------------------------------- > Filip Brozovic (1): > fastboot: Support defining raw partitions without a partition table > > Frank Li (1): > sdp: call board_usb_init at spl_sdp_load_image > > Gary Bisson (1): > fastboot: getvar: fix partition-size return value > > Hayes Wang (4): > eth/r8152: reset bmu after disabling Tx/Rx > eth/r8152: reset PHY after setting it > eth/r8152: modify rtl_clear_bp function > eth/r8152: support RTL8153B/RTL8154B > > Heinrich Schuchardt (4): > dfu: fix typo parameteres > dfu: DFU_MTD depends on CMD_MTDPARTS > configs: qemu: enable dfu testing > dfu: fix dfu tftp on sandbox > > Jassi Brar (1): > usb: max3420: add the gadget driver > > Peng Fan (2): > f_sdp: Support searching and loading FIT or container image > spl: add g_dnl_get_board_bcd_device_number > > Roman Kovalivskyi (3): > fastboot: Extend fastboot_set_reboot_flag with reboot reason > fastboot: Add support for 'reboot fastboot' command > fastboot: Add default fastboot_set_reboot_flag implementation > > Sherry Sun (2): > f_sdp: Add EP1_OUT as default data receive pipe in sdp > f_sdp: Change bInterval of interrupt endpoint to 3 > > Ye Li (4): > usb: gadget: Fix controller index in UMS > usb: ci_udc: Add function to remove usb device > f_sdp: Add high speed endpoint descriptor > f_sdp: Fix wrong usb request size > > yurii.pidhornyi (1): > fastboot: Fix fastboot reboot fail by changing functions order > > arch/arm/mach-imx/spl.c | 6 + > arch/arm/mach-meson/board-common.c | 6 +- > arch/arm/mach-rockchip/board.c | 6 +- > board/amazon/kc1/kc1.c | 6 +- > board/lg/sniper/sniper.c | 6 +- > board/ti/am57xx/board.c | 6 +- > board/ti/dra7xx/evm.c | 6 +- > cmd/usb_mass_storage.c | 2 +- > common/spl/spl_sdp.c | 2 + > common/update.c | 6 +- > configs/qemu_arm64_defconfig | 9 + > configs/qemu_arm_defconfig | 9 + > doc/android/fastboot.rst | 19 +++ > drivers/dfu/Kconfig | 1 + > drivers/dfu/dfu_ram.c | 7 +- > drivers/fastboot/Kconfig | 12 ++ > drivers/fastboot/Makefile | 1 + > drivers/fastboot/fb_bcb_impl.c | 43 +++++ > drivers/fastboot/fb_command.c | 40 ++++- > drivers/fastboot/fb_common.c | 2 +- > drivers/fastboot/fb_getvar.c | 4 +- > drivers/fastboot/fb_mmc.c | 75 ++++++++- > drivers/usb/eth/r8152.c | 223 ++++++++++++++++++++++++- > drivers/usb/eth/r8152.h | 59 +++++-- > drivers/usb/eth/r8152_fw.c | 228 +++++++++++++++++++++++--- > drivers/usb/gadget/Kconfig | 6 + > drivers/usb/gadget/Makefile | 1 + > drivers/usb/gadget/ci_udc.c | 7 + > drivers/usb/gadget/f_fastboot.c | 6 +- > drivers/usb/gadget/f_mass_storage.c | 6 +- > drivers/usb/gadget/f_sdp.c | 219 +++++++++++++++++++++---- > drivers/usb/gadget/gadget_chips.h | 8 + > drivers/usb/gadget/max3420_udc.c | 875 > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > drivers/usb/host/usb-uclass.c | 18 ++ > include/dfu.h | 2 +- > include/fastboot.h | 23 ++- > include/usb.h | 9 + > include/usb_mass_storage.h | 2 +- > net/fastboot.c | 2 + > 39 files changed, 1867 insertions(+), 101 deletions(-) > create mode 100644 drivers/fastboot/fb_bcb_impl.c > create mode 100644 drivers/usb/gadget/max3420_udc.c
This feels like a lot. Is it really a good time to take these for v2020.10 or should I put them in -next, next week when it opens? -- Tom
signature.asc
Description: PGP signature