> -----Original Message----- > From: Shawn Jin [mailto:shawnx...@gmail.com] > Sent: Tuesday, September 21, 2010 1:53 AM > To: Chen, Tiejun > Cc: ppcdev; uboot > Subject: Re: cuImage and multi image? > > >> I have a cuImage kernel in order to support legacy u-boot and a > >> ramdisk image. Kernel boots fine if these two images are > separate and > >> "bootm $kernel $ramdisk" is used. But I can not make it to > work using > >> a single multi image that contains the kernel and ramdisk > images. Is > >> it even technically possible to boot a multi-image with cuboot > >> wrapper? > > > > Try the following steps: > > ------ > > 1. cp <your ramdisk.gz> arch/powerpc/boot/ramdisk.image.gz > > 2. make cuImage.initrd.<your target> > > > > You can get one Image, cuImage.initrd.<your target>, > including kernel and ramdisk. > > A follow up question. With this method, the total image size > (uncompressed) is limited to the 4MB (the link address of the > boot wrapper)?
No. Cheers Tiejun > > Thanks, > -Shawn. > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot