Use ofnode_ or dev_ APIs instead of fdt_ and fdtdec_ APIs so that the
driver can support live DT.
Signed-off-by: Patrick Delaunay <patrick.delau...@st.com>
---
drivers/pinctrl/pinctrl_stm32.c | 43 ++++++++++++++++++---------------
1 file changed, 23 insertions(+), 20 deletions(-)
diff --git a/drivers/pinctrl/pinctrl_stm32.c b/drivers/pinctrl/pinctrl_stm32.c
index 71fa29a389..24ed83dd46 100644
--- a/drivers/pinctrl/pinctrl_stm32.c
+++ b/drivers/pinctrl/pinctrl_stm32.c
@@ -13,8 +13,6 @@
#include <linux/err.h>
#include <linux/libfdt.h>
-DECLARE_GLOBAL_DATA_PTR;
-
#define MAX_PINS_ONE_IP 70
#define MODE_BITS_MASK 3
#define OSPEED_MASK 3
@@ -308,7 +306,8 @@ static int prep_gpio_dsc(struct stm32_gpio_dsc *gpio_dsc,
u32 port_pin)
return 0;
}
-static int prep_gpio_ctl(struct stm32_gpio_ctl *gpio_ctl, u32 gpio_fn, int
node)
+static int prep_gpio_ctl(struct stm32_gpio_ctl *gpio_ctl, u32 gpio_fn,
+ ofnode node)
{
gpio_fn &= 0x00FF;
gpio_ctl->af = 0;
@@ -329,16 +328,16 @@ static int prep_gpio_ctl(struct stm32_gpio_ctl *gpio_ctl,
u32 gpio_fn, int node)
break;
}
- gpio_ctl->speed = fdtdec_get_int(gd->fdt_blob, node, "slew-rate", 0);
+ gpio_ctl->speed = ofnode_read_u32_default(node, "slew-rate", 0);
- if (fdtdec_get_bool(gd->fdt_blob, node, "drive-open-drain"))
+ if (ofnode_read_bool(node, "drive-open-drain"))
gpio_ctl->otype = STM32_GPIO_OTYPE_OD;
else
gpio_ctl->otype = STM32_GPIO_OTYPE_PP;
- if (fdtdec_get_bool(gd->fdt_blob, node, "bias-pull-up"))
+ if (ofnode_read_bool(node, "bias-pull-up"))
gpio_ctl->pupd = STM32_GPIO_PUPD_UP;
- else if (fdtdec_get_bool(gd->fdt_blob, node, "bias-pull-down"))
+ else if (ofnode_read_bool(node, "bias-pull-down"))
gpio_ctl->pupd = STM32_GPIO_PUPD_DOWN;
else
gpio_ctl->pupd = STM32_GPIO_PUPD_NO;
@@ -350,32 +349,37 @@ static int prep_gpio_ctl(struct stm32_gpio_ctl *gpio_ctl,
u32 gpio_fn, int node)
return 0;
}
-static int stm32_pinctrl_config(int offset)
+static int stm32_pinctrl_config(ofnode node)
{
u32 pin_mux[MAX_PINS_ONE_IP];
int rv, len;
+ ofnode subnode;
/*
* check for "pinmux" property in each subnode (e.g. pins1 and pins2 for
* usart1) of pin controller phandle "pinctrl-0"
* */
- fdt_for_each_subnode(offset, gd->fdt_blob, offset) {
+ ofnode_for_each_subnode(subnode, node) {
struct stm32_gpio_dsc gpio_dsc;
struct stm32_gpio_ctl gpio_ctl;
int i;
- len = fdtdec_get_int_array_count(gd->fdt_blob, offset,
- "pinmux", pin_mux,
- ARRAY_SIZE(pin_mux));
+ rv = ofnode_read_size(subnode, "pinmux");
+ if (rv < 0)
+ return rv;
+ len = rv / sizeof(pin_mux[0]);
debug("%s: no of pinmux entries= %d\n", __func__, len);
- if (len < 0)
+ if (len > MAX_PINS_ONE_IP)
return -EINVAL;
+ rv = ofnode_read_u32_array(subnode, "pinmux", pin_mux, len);
+ if (rv < 0)
+ return rv;
for (i = 0; i < len; i++) {
struct gpio_desc desc;
debug("%s: pinmux = %x\n", __func__, *(pin_mux + i));
prep_gpio_dsc(&gpio_dsc, *(pin_mux + i));
- prep_gpio_ctl(&gpio_ctl, *(pin_mux + i), offset);
+ prep_gpio_ctl(&gpio_ctl, *(pin_mux + i), subnode);
rv = uclass_get_device_by_seq(UCLASS_GPIO,
gpio_dsc.port,
&desc.dev);
@@ -424,19 +428,18 @@ static int stm32_pinctrl_bind(struct udevice *dev)
#if CONFIG_IS_ENABLED(PINCTRL_FULL)
static int stm32_pinctrl_set_state(struct udevice *dev, struct udevice *config)
{
- return stm32_pinctrl_config(dev_of_offset(config));
+ return stm32_pinctrl_config(dev_ofnode(config));
}
#else /* PINCTRL_FULL */
static int stm32_pinctrl_set_state_simple(struct udevice *dev,
struct udevice *periph)
{
- const void *fdt = gd->fdt_blob;
const fdt32_t *list;
uint32_t phandle;
- int config_node;
+ ofnode config_node;
int size, i, ret;
- list = fdt_getprop(fdt, dev_of_offset(periph), "pinctrl-0", &size);
+ list = ofnode_get_property(dev_ofnode(periph), "pinctrl-0", &size);
if (!list)
return -EINVAL;
@@ -446,8 +449,8 @@ static int stm32_pinctrl_set_state_simple(struct udevice
*dev,
for (i = 0; i < size; i++) {
phandle = fdt32_to_cpu(*list++);
- config_node = fdt_node_offset_by_phandle(fdt, phandle);
- if (config_node < 0) {
+ config_node = ofnode_get_by_phandle(phandle);
+ if (!ofnode_valid(config_node)) {
pr_err("prop pinctrl-0 index %d invalid phandle\n", i);
return -EINVAL;
}
--
2.17.1
