This converts the clint driver from the riscv-specific interface to be a
DM-based UCLASS_TIMER driver. In addition, the SiFive DDR driver previously
implicitly depended on the CLINT to select REGMAP.
Unlike Andes's PLMT/PLIC (which AFAIK never have anything pass it a dtb),
the SiFive CLINT is part of the device tree passed in by qemu. This device
tree doesn't have a clocks or clock-frequency property on clint, so we need
to fall back on the timebase-frequency property. Perhaps in the future we
can get a clock-frequency property added to the qemu dtb.
Unlike with the Andes PLMT, the Sifive CLINT is also an IPI controller.
RISCV_SYSCON_CLINT is retained for this purpose.
Signed-off-by: Sean Anderson <sean...@gmail.com>
Reviewed-by: Pragnesh Patel <pragnesh.pa...@openfive.com>
---
This patch builds but has only been tested on the K210 and QEMU. It has NOT
been tested on a HiFive.
Changes in v4:
- Use timer_timebase_fallback
Changes in v3:
- Don't initialize the IPI in spl_invoke_opensbi. Further testing has
revealed it to be unnecessary.
arch/riscv/Kconfig | 4 ---
arch/riscv/lib/sifive_clint.c | 66 +++++++++++++++++++----------------
drivers/ram/sifive/Kconfig | 2 ++
3 files changed, 38 insertions(+), 34 deletions(-)
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index d9155b9bab..aaa3b833a5 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -155,10 +155,6 @@ config 64BIT
config SIFIVE_CLINT
bool
depends on RISCV_MMODE || SPL_RISCV_MMODE
- select REGMAP
- select SYSCON
- select SPL_REGMAP if SPL
- select SPL_SYSCON if SPL
help
The SiFive CLINT block holds memory-mapped control and status
registers
associated with software and timer interrupts.
diff --git a/arch/riscv/lib/sifive_clint.c b/arch/riscv/lib/sifive_clint.c
index b9a2c649cc..c9704c596f 100644
--- a/arch/riscv/lib/sifive_clint.c
+++ b/arch/riscv/lib/sifive_clint.c
@@ -8,9 +8,9 @@
*/
#include <common.h>
+#include <clk.h>
#include <dm.h>
-#include <regmap.h>
-#include <syscon.h>
+#include <timer.h>
#include <asm/io.h>
#include <asm/syscon.h>
#include <linux/err.h>
@@ -24,35 +24,19 @@
DECLARE_GLOBAL_DATA_PTR;
-int riscv_get_time(u64 *time)
-{
- /* ensure timer register base has a sane value */
- riscv_init_ipi();
-
- *time = readq((void __iomem *)MTIME_REG(gd->arch.clint));
-
- return 0;
-}
-
-int riscv_set_timecmp(int hart, u64 cmp)
-{
- /* ensure timer register base has a sane value */
- riscv_init_ipi();
-
- writeq(cmp, (void __iomem *)MTIMECMP_REG(gd->arch.clint, hart));
-
- return 0;
-}
-
int riscv_init_ipi(void)
{
- if (!gd->arch.clint) {
- long *ret = syscon_get_first_range(RISCV_SYSCON_CLINT);
+ int ret;
+ struct udevice *dev;
- if (IS_ERR(ret))
- return PTR_ERR(ret);
- gd->arch.clint = ret;
- }
+ ret = uclass_get_device_by_driver(UCLASS_TIMER,
+ DM_GET_DRIVER(sifive_clint), &dev);
+ if (ret)
+ return ret;
+
+ gd->arch.clint = dev_read_addr_ptr(dev);
+ if (!gd->arch.clint)
+ return -EINVAL;
return 0;
}
@@ -78,14 +62,36 @@ int riscv_get_ipi(int hart, int *pending)
return 0;
}
+static int sifive_clint_get_count(struct udevice *dev, u64 *count)
+{
+ *count = readq((void __iomem *)MTIME_REG(dev->priv));
+
+ return 0;
+}
+
+static const struct timer_ops sifive_clint_ops = {
+ .get_count = sifive_clint_get_count,
+};
+
+static int sifive_clint_probe(struct udevice *dev)
+{
+ dev->priv = dev_read_addr_ptr(dev);
+ if (!dev->priv)
+ return -EINVAL;
+
+ return timer_timebase_fallback(dev);
+}
+
static const struct udevice_id sifive_clint_ids[] = {
- { .compatible = "riscv,clint0", .data = RISCV_SYSCON_CLINT },
+ { .compatible = "riscv,clint0" },
{ }
};
U_BOOT_DRIVER(sifive_clint) = {
.name = "sifive_clint",
- .id = UCLASS_SYSCON,
+ .id = UCLASS_TIMER,
.of_match = sifive_clint_ids,
+ .probe = sifive_clint_probe,
+ .ops = &sifive_clint_ops,
.flags = DM_FLAG_PRE_RELOC,
};
diff --git a/drivers/ram/sifive/Kconfig b/drivers/ram/sifive/Kconfig
index 6aca22ab2a..31ad0a7e45 100644
--- a/drivers/ram/sifive/Kconfig
+++ b/drivers/ram/sifive/Kconfig
@@ -9,5 +9,7 @@ config SIFIVE_FU540_DDR
bool "SiFive FU540 DDR driver"
depends on RAM_SIFIVE
default y if TARGET_SIFIVE_FU540
+ select REGMAP
+ select SPL_REGMAP if SPL
help
This enables DDR support for the platforms based on SiFive FU540 SoC.
--
2.28.0
