[PATCHv6 08/18] fsl: p1_p2_rdb: Move vsc7835 firmware uploading to board_early_init_r()

[Zhiqiang Hou]

From: Hou Zhiqiang <zhiqiang....@nxp.com>

Move vsc7835 firmware uploading to board_early_init_r(), so that
the switch also can work in DM eTSEC driver.

Signed-off-by: Hou Zhiqiang <zhiqiang....@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.olt...@nxp.com>
---
V6:
 - No change.

 board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 35 +++++++++++----------
 1 file changed, 18 insertions(+), 17 deletions(-)

diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c 
b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
index 7c703b354f..d0562ba95a 100644
--- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
+++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
@@ -316,6 +316,10 @@ int board_early_init_r(void)
 {
        const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
        int flash_esel = find_tlb_idx((void *)flashbase, 1);
+#ifdef CONFIG_VSC7385_ENET
+       unsigned int vscfw_addr;
+       char *tmp;
+#endif
 
        /*
         * Remap Boot flash region to caching-inhibited
@@ -338,6 +342,20 @@ int board_early_init_r(void)
        set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */
                MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,/* perms, wimge */
                0, flash_esel, BOOKE_PAGESZ_64M, 1);/* ts, esel, tsize, iprot */
+
+#ifdef CONFIG_VSC7385_ENET
+       /* If a VSC7385 microcode image is present, then upload it. */
+       tmp = env_get("vscfw_addr");
+       if (tmp) {
+               vscfw_addr = simple_strtoul(tmp, NULL, 16);
+               printf("uploading VSC7385 microcode from %x\n", vscfw_addr);
+               if (vsc7385_upload_firmware((void *)vscfw_addr,
+                                           CONFIG_VSC7385_IMAGE_SIZE))
+                       puts("Failure uploading VSC7385 microcode.\n");
+       } else {
+               puts("No address specified for VSC7385 microcode.\n");
+       }
+#endif
        return 0;
 }
 
@@ -348,10 +366,6 @@ int board_eth_init(struct bd_info *bis)
        ccsr_gur_t *gur __attribute__((unused)) =
                (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
        int num = 0;
-#ifdef CONFIG_VSC7385_ENET
-       char *tmp;
-       unsigned int vscfw_addr;
-#endif
 
 #ifdef CONFIG_TSEC1
        SET_STD_TSEC_INFO(tsec_info[num], 1);
@@ -375,19 +389,6 @@ int board_eth_init(struct bd_info *bis)
                return 0;
        }
 
-#ifdef CONFIG_VSC7385_ENET
-       /* If a VSC7385 microcode image is present, then upload it. */
-       tmp = env_get("vscfw_addr");
-       if (tmp) {
-               vscfw_addr = simple_strtoul(tmp, NULL, 16);
-               printf("uploading VSC7385 microcode from %x\n", vscfw_addr);
-               if (vsc7385_upload_firmware((void *) vscfw_addr,
-                                       CONFIG_VSC7385_IMAGE_SIZE))
-                       puts("Failure uploading VSC7385 microcode.\n");
-       } else
-               puts("No address specified for VSC7385 microcode.\n");
-#endif
-
        mdio_info.regs = TSEC_GET_MDIO_REGS_BASE(1);
        mdio_info.name = DEFAULT_MII_NAME;
 
-- 
2.17.1