On 10/09/2020 10:48, Neil Armstrong wrote: > This serie follows the recent work under Linux to rework and update support of > the USB complex in the Amlogic GXL, GXM & AXG SoCs. > > This rework follows the clean implementation for the G12A & following SoCs to > support > Host, Device & OTG functionnality. > > The GXL, GXM & AXG USB complex is architectured in the same was as the G12A & > later USB complex, > thus we can use the same architecture but adapted to the different init & > config flow found > in the Amlogic GXL, GXM & AXG SoCs. > > With this patchset, USB Host functionnality is retained, working & tested on > the Khadas VIM2 (GXM), > Libretech-CC (GXL) & S400 (AXG), with Device mode added and tested by using > the UMS gadget. > > Neil Armstrong (8): > ARM: dts: sync amlogic AXG/GXL/GXM DT from Linux 5.8-rc1 > usb: dwc3: add Amlogic GXL & GXL DWC3 Glue > ARM: mach-meson: use new DWC3 glue for GXL & GXM > phy: meson-gxl: remove invalid USB3 PHY driver > phy: meson-gxl-usb: depend on Meson AXG aswell > arm: meson-axg: add board_usb_init()/cleanup() for USB gadget > ARM: dts: meson-axg: add USB nodes for S400 > configs: s400: enable USB > > arch/arm/dts/meson-axg-s400-u-boot.dtsi | 12 + > arch/arm/dts/meson-axg-u-boot.dtsi | 62 +++ > arch/arm/dts/meson-axg.dtsi | 6 +- > arch/arm/dts/meson-gx-libretech-pc.dtsi | 78 +++- > arch/arm/dts/meson-gx.dtsi | 23 +- > arch/arm/dts/meson-gxbb-nanopi-k2.dts | 2 +- > arch/arm/dts/meson-gxbb-odroidc2.dts | 2 +- > arch/arm/dts/meson-gxbb.dtsi | 23 + > .../meson-gxl-s805x-libretech-ac-u-boot.dtsi | 4 - > arch/arm/dts/meson-gxl-s805x-libretech-ac.dts | 73 ++- > .../meson-gxl-s905d-libretech-pc-u-boot.dtsi | 4 - > .../meson-gxl-s905x-khadas-vim-u-boot.dtsi | 4 - > arch/arm/dts/meson-gxl-s905x-khadas-vim.dts | 4 + > .../meson-gxl-s905x-libretech-cc-u-boot.dtsi | 4 - > arch/arm/dts/meson-gxl-s905x-libretech-cc.dts | 77 +++- > arch/arm/dts/meson-gxl-s905x-p212.dtsi | 3 +- > arch/arm/dts/meson-gxl-u-boot.dtsi | 16 - > arch/arm/dts/meson-gxl.dtsi | 79 +++- > .../arm/dts/meson-gxm-khadas-vim2-u-boot.dtsi | 4 - > arch/arm/dts/meson-gxm-khadas-vim2.dts | 3 +- > .../meson-gxm-s912-libretech-pc-u-boot.dtsi | 4 - > arch/arm/dts/meson-gxm.dtsi | 7 +- > arch/arm/include/asm/arch-meson/usb-gx.h | 3 +- > arch/arm/mach-meson/board-axg.c | 128 ++++++ > arch/arm/mach-meson/board-gx.c | 127 +++--- > configs/khadas-vim2_defconfig | 2 +- > configs/khadas-vim_defconfig | 2 +- > configs/libretech-ac_defconfig | 2 +- > configs/libretech-cc_defconfig | 2 +- > configs/libretech-s905d-pc_defconfig | 2 +- > configs/libretech-s912-pc_defconfig | 2 +- > configs/p212_defconfig | 2 +- > configs/s400_defconfig | 15 + > drivers/phy/Kconfig | 2 +- > drivers/phy/Makefile | 2 +- > drivers/phy/meson-gxl-usb3.c | 219 --------- > drivers/usb/dwc3/Kconfig | 8 + > drivers/usb/dwc3/Makefile | 1 + > drivers/usb/dwc3/dwc3-meson-gxl.c | 425 ++++++++++++++++++ > .../reset/amlogic,meson-gxbb-reset.h | 2 +- > include/dt-bindings/sound/meson-aiu.h | 18 + > 41 files changed, 1092 insertions(+), 366 deletions(-) > create mode 100644 arch/arm/dts/meson-axg-u-boot.dtsi > delete mode 100644 drivers/phy/meson-gxl-usb3.c > create mode 100644 drivers/usb/dwc3/dwc3-meson-gxl.c > create mode 100644 include/dt-bindings/sound/meson-aiu.h >
Applied to u-boot-amlogic-next